Industrial Wireless LAN

FZ-OW-1000 APP – FZ-OW-1000 802.11b/g Industrial Wireless AP/Bridge

Description
The FZ-OW-1000 is an IEEE802.11 b/g industrial grade high-performance, wireless AP/ Bridge/ WDS Repeater that supports high-speed wireless networking in open public space. The FZ-OW-1000 can operate as a Point-to-Multipoint Bridge/ Access Point / Repeater and can be configure with different operation methodology in one device.
The FZ-OW-1000 provides data transfers up to 54 Mbps (compared to the IEEE 802.11b standard 11 Mbps mode). The IEEE 802.11g standard is backwards compatible with 802.11b products. You may choose to slowly change your network by gradually replacing the 802.11b devices with 802.11 b/g devices.

Key Features
- Atheros SOC solution
- IEEE 802.11 b/g
- IEEE 802.3 af Power over Ethernet support
- Multi operating modes support: Access Point, CB+AP, AP Router Mode,
CB+AP Route Mode, Hotspot AP, VLAN enabled AP, VLAN enabled CB+AP
- Bandwidth limitation
- Multiple SSID support
- Supports WEP 64/128, WPA, WPA2 Authentication
- Support SNMP V1/V2c/V3
- Output Power up to 17 dBm ± 2
- Support ACL (Wireless Access Control Setting)
- Support STP/RSTP
- IP65 Industrial standard

Technical Specifications

General

Data Rates

802.11 b: 1, 2, 5.5, 11Mbps

802.11g: 6,9,12,18,24,36,48,54 Mbps

Standards

IEEE802.11 b/g, IEEE802.1x, IEEE802.3, IEEE802.3u

Power Requirements

Active Ethernet  (Power over Ethernet) –48 VDC/0.375A

External Unit: Auto sensing 100/240 VAC; 50/60 Hz

Regulation Certifications

FCC/CE ;  IP65

RF Information

Frequency Band

2.400~2.484 GHz ;

Media Access Protocol

Carrier sense multiple access with collision avoidance (CSMA/CA)

Modulation Technology

802.11 b:

Direct-Sequence Spread Spectrum (DSSS)

DBPSK @ 1Mbps

DQPSK @ 2Mbps

CCK @ 5.5 and 11Mbps

802.11 g:

Orthogonal Frequency Division Multiplexing (OFDM)

BPSK @ 6 and 9 Mbps

QPSK @ 12 and 18 Mbps

16-QAM @ 24 and 36 Mbps

64-QAM @ 48 and 54 Mbps

Receive Sensitivity

2.412~2.472G(IEEE802.11g)

[email protected] -92dBm

[email protected] -76dBm

2.412~2.472G(IEEE802.11b)

[email protected] -96dBm

11[email protected] -92dBm

Transmit Output Power(Typical)

IEEE802.11g: 14dBm

IEEE802.11b: 17dBm

Networking Information

Topology

Infrastructure

Operation Mode

Access Point, CB+AP, AP Router Mode, CB+AP Route Mode, Hotspot AP, VLAN enabled AP, VLAN enabled CB+AP

SSID 

Multiple SSID 

Interface

One 10/100Mbps RJ-45 LAN Port (Auto Switch)

Security

IEEE802.1x / RADIUS Client (TTLS, PEAP) Support in AP Mode 

IEE802.1x Supplicant (TTLS, PEAP) support in Client Bridge Mode 

WPA-WiFi Protected Access  

WPA2 (802.11i) 

WEP 64,128 bits 

MAC address filtering 

Layer2 Isolation 

VLAN  tunneling Support 

Hide SSID 

STP/RSTP

STP/RSTP

QOS

WMM

Bandwidth limitation

Bandwidth limitation

Management

IP Auto-configuration 

DHCP client/ server 

SNMP 

V1/V2c/V3

NTP 

Support NTP client

Remote Configuration

Web-based configuration (HTTP)

Telnet 

Firmware Upgrade

Upgrade firmware via web-browser/TFTP/FTP

RS-232 console port (option)

Physical

Dimensions

209.1(L)mm *165.4(W)mm * 61.5(H)mm

Weight

500 g

Environmental

Temperature Range

Operating :-10°C to 60°C (14°F to158 °F)

Storage :-40°C to 85°C (-40°F to 185°F)

Humidity

(non-condensing)

5%~95% Typical

Accessories

Package Contents

Water tight Outdoor Wireless Access point unit

User’s manual CD-ROM 
Wall mounting kit    

5 dBi Omni 2.4GHz antenna *2 for FZ-OW-1000APP

POE injector + Power Adapter

Packing Information

Carton Dimensions(mm)

pcs/Carton

N.W (KG)

G.W (KG)

523x489x267

4

14.8

15.8

 Ordering Information  

FZ-OW-1000APP

FZ-OW-1000 Industrial Wireless Access Point 802.11 b/g IP65 with 5dBi Omni antennas

FZ-OW-1000CBP

FZ-OW-1000 Industrial Wireless Access Point 802.11 b/g IP65 with 9dBi embedded Panel antenna

FZ-OW-1000 CBP – FZ-OW-1000 802.11b/g Industrial Wireless AP/Bridge

Description
The FZ-OW-1000 is an IEEE802.11 b/g industrial grade high-performance, wireless AP/ Bridge/ WDS Repeater that supports high-speed wireless networking in open public space. The FZ-OW-1000 can operate as a Point-to-Multipoint Bridge/ Access Point / Repeater and can be configure with different operation methodology in one device.

The FZ-OW-1000 provides data transfers up to 54 Mbps (compared to the IEEE 802.11b standard 11 Mbps mode). The IEEE 802.11g standard is backwards compatible with 802.11b products. You may choose to slowly change your network by gradually replacing the 802.11b devices with 802.11 b/g devices.

Key Features
- Atheros SOC solution
- IEEE 802.11 b/g
- IEEE 802.3 af Power over Ethernet support
- Multi operating modes support: Access Point, CB+AP, AP Router Mode, CB+AP Route Mode, Hotspot AP, VLAN enabled AP, VLAN enabled CB+AP
- Bandwidth limitation
- Multiple SSID support
- Supports WEP 64/128, WPA, WPA2 Authentication
- Support SNMP V1/V2c/V3
- Output Power up to 17 dBm ± 2
- Support ACL (Wireless Access Control Setting)
- Support STP/RSTP
- IP65 Industrial standard

Technical Specifications

General

Data Rates

802.11 b: 1, 2, 5.5, 11Mbps

802.11g: 6,9,12,18,24,36,48,54 Mbps

Standards

IEEE802.11 b/g, IEEE802.1x, IEEE802.3, IEEE802.3u

Power Requirements

Active Ethernet  (Power over Ethernet) –48 VDC/0.375A

External Unit: Auto sensing 100/240 VAC; 50/60 Hz

Regulation Certifications

FCC/CE ;  IP65

RF Information

Frequency Band

2.400~2.484 GHz ;

Media Access Protocol

Carrier sense multiple access with collision avoidance (CSMA/CA)

Modulation Technology

802.11 b:

Direct-Sequence Spread Spectrum (DSSS)

DBPSK @ 1Mbps

DQPSK @ 2Mbps

CCK @ 5.5 and 11Mbps

802.11 g:

Orthogonal Frequency Division Multiplexing (OFDM)

BPSK @ 6 and 9 Mbps

QPSK @ 12 and 18 Mbps

16-QAM @ 24 and 36 Mbps

64-QAM @ 48 and 54 Mbps

Receive Sensitivity

¦2.412~2.472G(IEEE802.11g)

[email protected] -92dBm

[email protected] -76dBm

¦2.412~2.472G(IEEE802.11b)

[email protected] -96dBm

11[email protected] -92dBm

Transmit Output Power(Typical)

¦IEEE802.11g: 14dBm

¦IEEE802.11b: 17dBm

Networking Information

Topology

Infrastructure

Operation Mode

Access Point, CB+AP, AP Router Mode, CB+AP Route Mode, Hotspot AP, VLAN enabled AP, VLAN enabled CB+AP

SSID 

Multiple SSID 

Interface

One 10/100Mbps RJ-45 LAN Port (Auto Switch)

Security

¦IEEE802.1x / RADIUS Client (TTLS, PEAP) Support in AP Mode 

¦IEE802.1x Supplicant (TTLS, PEAP) support in Client Bridge Mode 

¦WPA-WiFi Protected Access  

¦WPA2 (802.11i) 

¦WEP 64,128 bits 

¦MAC address filtering 

¦Layer2 Isolation 

¦VLAN  tunneling Support 

¦Hide SSID 

STP/RSTP

STP/RSTP

QOS

WMM

Bandwidth limitation

Bandwidth limitation

Management

IP Auto-configuration 

DHCP client/ server 

SNMP 

V1/V2c/V3

NTP 

Support NTP client

Remote Configuration

¦Web-based configuration (HTTP)

¦Telnet 

Firmware Upgrade

Upgrade firmware via web-browser/TFTP/FTP

RS-232 console port (option)

Physical

Dimensions

209.1(L)mm *165.4(W)mm * 61.5(H)mm

Weight

500 g

Environmental

Temperature Range

Operating :-10°C to 60°C (14°F to158 °F)

Storage :-40°C to 85°C (-40°F to 185°F)

Humidity

(non-condensing)

5%~95% Typical

Accessories

Package Contents

¦Water tight Outdoor Wireless Access point unit

¦User’s manual CD-ROM 
¦Wall mounting kit    

¦5 dBi Omni 2.4GHz antenna *2 for FZ-OW-1000APP

¦POE injector + Power Adapter

Packing Information

Carton Dimensions(mm)

pcs/Carton

N.W (KG)

G.W (KG)

523x489x267

4

14.8

15.8

Ordering Information

FZ-OW-1000APP

FZ-OW-1000 Industrial Wireless Access Point 802.11 b/g IP65 with 5dBi Omni antennas

FZ-OW-1000CBP

FZ-OW-1000 Industrial Wireless Access Point 802.11 b/g IP65 with 9dBi embedded Panel antenna

FZ-OW-1000A 802.11b/g Industrial Wireless 26dBm AP/Bridge

Description
The FZ-OW-1000A is an IEEE802.11 b/g industrial grade high power wireless AP/ Bridge/ Repeater that supports high-speed wireless networking in open public space. The FZ-OW-1000A can operate as a Point-to-Multipoint Bridge/ Access Point / Repeater and can be configure with different operation methodology in one device.

The FZ-OW-1000A provides data transfers up to 54 Mbps (compared to the IEEE 802.11b standard 11 Mbps mode). The IEEE 802.11g standard is backwards compatible with 802.11b products. You may choose to slowly change your network by gradually replacing the 802.11b devices with 802.11 b/g devices.

Key Features
- Atheros SOC solution
- IEEE 802.11 b/g
- Power over Ethernet support. 12V, 1A.
- Multi operating modes support: Access Point, CB+AP, AP Router Mode, CB+AP Route Mode, Hotspot AP, VLAN enabled AP, VLAN enabled CB+AP
- Bandwidth limitation
- Multiple SSID support
- Supports WEP 64/128, WPA, WPA2 Authentication
- Support SNMP V1/V2c/V3
- RF Output Power up to 26Bm ± 2
- Support ACL (Wireless Access Control Setting)
- Support STP/RSTP
- IP65 Industrial standard

Technical Specifications

General

Data Rates

802.11b: 1, 2, 5.5, 11Mbps

802.11g: 6,9,12,18,24,36,48,54 Mbps

Standards

IEEE802.11 b/g, IEEE802.1x, IEEE802.3, IEEE802.3u,

Power Requirements

Active Ethernet  (Power over Ethernet) –12 VDC/ 1A

External Unit: Auto sensing 100/240 VAC; 50/60 Hz

Regulation Certifications

FCC/CE ; IP65

RF Information

Frequency Band

2.400~2.484 GHz ;

Media Access Protocol

Carrier sense multiple access with collision avoidance (CSMA/CA)

Modulation Technology

802.11 b:

Direct-Sequence Spread Spectrum (DSSS)

DBPSK @ 1Mbps

DQPSK @ 2Mbps

CCK @ 5.5 and 11Mbps

802.11 g:

Orthogonal Frequency Division Multiplexing (OFDM)

BPSK @ 6 and 9 Mbps

QPSK @ 12 and 18 Mbps

16-QAM @ 24 and 36 Mbps

64-QAM @ 48 and 54 Mbps

Receive Sensitivity

¦2.412~2.472G (IEEE802.11g)

[email protected] ± 1

[email protected] ± 1

¦2.412~2.472G (IEEE802.11b)

[email protected] ± 1

[email protected] ± 1

Transmit Output Power(Typical)

¦IEEE802.11g: 26dBm ± 2

¦IEEE802.11b: 26dBm ± 2

Antennas

SMA external connector and 9dBi internal panel antenna

Networking Information

Topology

Infrastructure

Operation Mode

Access Point, CB+AP, AP Router Mode, CB+AP Route Mode, Hotspot AP, VLAN enabled AP, VLAN enabled CB+AP

SSID 

Multiple SSID 

Interface

One 10/100Mbps RJ-45 LAN Port (Auto Switch)

Security

¦ IEEE802.1x / RADIUS Client (TTLS, PEAP) Support in AP Mode 

¦IEE802.1x Supplicant (TTLS, PEAP) support in Client Bridge Mode 

¦WPA-WiFi Protected Access  

¦WPA2 (802.11i) 

¦WEP 64,128 bits 

¦MAC address filtering 

¦Layer2 Isolation 

¦VLAN  tunneling Support 

¦Hide SSID 

STP/RSTP

STP/RSTP

QOS

WMM

Bandwidth limitation

Bandwidth limitation

Management

IP Auto-configuration 

DHCP client/ server 

SNMP 

V1/V2c/V3

NTP 

Support NTP client

Remote Configuration

¦Web-based configuration (HTTP)

¦Telnet 

Firmware Upgrade

Upgrade firmware via web-browser /TFTP/FTP

Physical

Dimensions

188(L)mm *113(W)mm * 38(H)mm

Weight

380 g

Environmental

Temperature Range

Operating :-10°C to 60°C (14°F to158 °F)

Storage :-40°C to 85°C (-40°F to 185°F)

Humidity (non-condensing)

5%~95% Typical

Accessories

Package Contents

¦Water tight Outdoor Wireless Access point unit

¦User’s manual CD-ROM 
¦Pole mounting kit    

¦POE injector + Power Adapter

 Packing Information

Carton Dimensions(mm)

pcs/Carton

N.W (KG)

G.W (KG)

523x489x267

10

8.4

9.4

 Ordering Information

OW1000A

FZ-OW-1000A Wireless Access Point High Power 802.11b/g 9dBi IP65