Outdoor Wireless LAN

FZ-OW-2000 APD – FZ-OW-2000 WIRELESS ACCESS POINT (IP68)

Description
The FZ-OW-2000APD Outdoor Wireless Access Point/WDS (wireless distribution system) operates seamlessly in the 2.4 GHz frequency supporting the IEEE 802.11b/802.11g wireless standards. It’s the best way to add wireless capability to your existing wired network, or to add bandwidth to your existing wireless installation.

To secure your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA/WPA2, MAC address filter lets you select exactly which stations should have access to your network. With the Wireless Access Point/WDS, you’ll experience the best wireless connectivity available today.

Key Features
- Output Power up to 17 dBm
- IEEE 802.11b/g Compliant
- Point-to-point, Point-to-multipoint Wireless Connectivity
- WEP/WPA/WPA2/ IEEE 802.1x Authenticator support 
- WDS (Wireless Distribution System)
- Dust tight and Watertight and Weatherproof (IP68)
- Lightening Protection
- Wide temperature range and robust mechanical design
- Power-over-Ethernet (IEEE802.3af Compliant) 
- RoHS Compliance

Technical Specifications

-       Data Rates
- 802.11b:1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps

-        Standards:IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u

-        Watertight and Weatherproof:APD:IP68

- Compatibility:IEEE 802.11b/ IEEE 802.11g compatible

- POE:802.3af standard Power over Ethernet

- Frequency Band
- 2.400~2.484 GHz

- Media Access Protocol:Carrier sense multiple access with collision avoidance (CSMA/CA)

-       Temperature Range
- Operating:-20°C to 70°C (-4°F to 158°F)
- Storage: -40°C to 80°C (-40°F to 176°F)

-   Humidity (non-condensing):5%~95% Typical

Security
- 802.1x Authenticator
- MAC Address Filltering
- Layer 2 Isolation

- Hide SSID in beacons

- IEEE802.1x / RADIUS Client (EAP-MD5/TLS/TTLS, PEAP)

Ordering Information

- Model

 

FZ-OW-2000APDNG68AU

FZ-OW-2000 WIRELESS ACCESS POINT NORMAL POWER 802.11 b/g 5dBi US

FZ-OW-2000APDNG68AE

FZ-OW-2000 WIRELESS ACCESS POINT NORMAL POWER 802.11 b/g 5dBi EU

FZ-OW-2000 CBP – FZ-OW-2000 WIRELESS CLIENT BRIDGE (IP67)

Description
The FZ-OW-2000CBP Outdoor Wireless Client Bridge operates seamlessly in the 2.4 GHz frequency supporting the IEEE 802.11b/802.11g wireless standards. It’s the best way to add wireless capability to your existing wired network, or to add bandwidth to your existing wireless installation.

To secure your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA/WPA2, MAC address filter lets you select exactly which stations should have access to your network. With the Wireless Multi-Client Bridge/Access Point/WDS, you’ll experience the best wireless connectivity available today.

Key Features
- High Speed Data Rate Up to 54Mbps
- Output Power up to 17 dBm (23dBm, 26dBm optional requirement)
- IEEE 802.11b/g Compliant
- Point-to-point, Point-to-multipoint Wireless Connectivity
- WEP/WPA/WPA2/ IEEE 802.1x Authenticator support
- WDS (Wireless Distribution System)
- Dust tight and Watertight and Weatherproof (IP67)
- Wide temperature range and robust mechanical design
- Power-over-Ethernet (IEEE802.3af Compliant)
- Watch Dog Function :Reboot the system while some situations make the system locks up.
- RoHS Compliance

Technical Specifications

- Data Rates
– 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps

– Standards:IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u

– Watertight and Weatherproof:CBP pass IP67

- Compatibility:IEEE 802.11b/ IEEE802.11g

- POE:802.3af standard Power over Ethernet

- Frequency Band
– 2.400~2.484 GHz

- Media Access Protocol:Carrier sense multiple access with collision avoidance (CSMA/CA)

- Temperature Range
– Operating:-20°C to 70°C (-4°F to 158°F)
– Storage: -40°C to 80°C (-40°F to 176°F)

– Humidity (non-condensing):5%~95% Typical

Security

– MAC Address Filltering

- Layer 2 Isolation

- Hide SSID in beacons

- IEEE802.1x authenticator / RADIUS Client (EAP-MD5/TLS/TTLS, PEAP)

Ordering Information

- Model

FZ-OW-2000CBPNG67BU FZ-OW-2000 WIRELESS CLIENT BRIDGE NORMAL POWER 802.11 b/g 9dBi US, IP67
FZ-OW-2000CBPNG67BE FZ-OW-2000 WIRELESS CLIENT BRIDGE NORMAL POWER 802.11 b/g 9dBi EU, IP67

FZ-OW-3000 IXP Platform – FZ-OW-3000 Intel IXP 425 Board

Description
FZ-OW-3000 is an outdoor wireless application for point to point and point to multipoint connectivity. FZ-OW-3000 includes the following interfaces: Wireless Interface and Ethernet Interface. Wireless Interface can be connected with any MiniPCI 802.11a/b/g cards acting as a CPE (or Base station) that depends on your device’s FW. Ethernet Interface is provided to connect customer’s network.

Key Features
- Intel IXP 425 solution
- Two Mini-PCI interface for any IEEE 802.11 a/b/g module
- IEEE 802.3 af Power over Ethernet support
- 5V DC-jack interface
- 16 MB flash
- 64MB SDRAM
- Redboot boot-loader included

Technical Specifications

Specification

- Processor: Intel IXP425-533MHz network processor

( pin-to-pin compatible IXP 42x family)

- Memory: 64 MB SDRAM

- Flash: 16MB

- Mini PCI Interface: 2 x Type III Mini PCI Slot

- Ethernet Interface (Power Over Ethernet): 2 x 10/100 Base-TX LAN port (with Auto MDI/MDIX) (Default will be one RJ45, 2 will be an option )

- RS-232 Serial port (console): 1

- Power supply: 5V /3A via power jack

- 802.3af PoE via RJ-45

- Dimensions: 5.24 inch x 6.1 inch

- Redboot boot-loader

- Board could support some (Ubiquity) mini PCI cards current consumption:

1.80 A on Transmit and 300mA Receive.

 

 

Packing Information

Carton Dimensions (mm)

pcs/Carton

N.W (KG)

G.W (KG)

493x430x352

60

12

14

 

- Ordering Information

FZ-OW-3000: FZ-OW-3000 IXP 425MHz board

FZ-OW-2000APP – FZ-OW-2000 Access Point ( IP67 )

Description
The FZ-OW-2000APP Outdoor Wireless Multi-Client Bridge/Access Point/WDS (wireless distribution system) operates seamlessly in the 2.4 GHz frequency supporting the IEEE 802.11b/802.11g wireless standards. It’s the best way to add wireless capability to your existing wired network, or to add bandwidth to your existing wireless installation.

To secure your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA/WPA2. A MAC address filter lets you select exactly which stations should have access to your network. With the Wireless Multi-Client Bridge/Access Point/WDS, you’ll experience the best wireless connectivity available today.

Key Features
- High Speed Data Rate Up to 54Mbps
- Output Power up to 17 dBm (23dBm, 26dBm optional requirement)
- IEEE 802.11b/g Compliant
- Point-to-point, Point-to-multipoint Wireless Connectivity
- WEP/WPA/WPA2/ IEEE 802.1x Authenticator support
- WDS (Wireless Distribution System)
- Dust tight and Watertight and Weatherproof (IP67)
- Wide temperature range and robust mechanical design
- Power-over-Ethernet (IEEE802.3af Compliant)
- Watch Dog Function :Reboot the system while some situations make the system locks up.
- RoHS Compliance

Technical Specifications

- Data Rates
– 802.11b:1, 2, 5.5, 11 Mbps
– 802.11a/g:6, 9, 12, 18, 24, 36, 48, 54 Mbps

– Standards:IEEE802.11a/b/g, IEEE802.1x, IEEE802.3, IEEE802.3u

– Watertight and Weatherproof:APP:IP67

- Compatibility:IEEE 802.11a/g/b compatible

- POE:802.3af standard Power over Ethernet

- Frequency Band
– 802.11b/g:2.400~2.484 GHz
– 802.11a: 5.15~5.35GHz ; 5.5~5.7GHz ; 5.725~5.825GHz

- Media Access Protocol:Carrier sense multiple access with collision avoidance (CSMA/CA)

- Temperature Range
– Operating:-20°C to 70°C (-4°F to 158°F)
– Storage: -40°C to 80°C (-40°F to 176°F) 

– Humidity (non-condensing):5%~95% Typical

Security

– 64/128-Bit WEP Encryption

– WPA Personal/ Enterprise Using TKIP

– 802.1x Authenticator

– MAC Address (Allow) Table for AP

– NAT hides the network addresses

– Stateful packet inspection (SPI)

- Firewall protects personal information

- Hide SSID in beacons

- IEEE802.1x / RADIUS Client (EAP-MD5/TLS/TTLS, PEAP)

Ordering Information

- Model

FZ-OW-2000APPNG67AU FZ-OW-2000 WIRELESS ACCESS POINT NORMAL POWER 802.11 b/g 5dBi US, IP67
FZ-OW-2000APPNG67AE FZ-OW-2000 WIRELESS ACCESS POINT NORMAL POWER 802.11 b/g 5dBi EU, IP67
FZ-OW-2000APPNG65AU FZ-OW-2000 WIRELESS ACCESS POINT NORMAL POWER 802.11 b/g 5dBi US, IP65
FZ-OW-2000APPNG65AE FZ-OW-2000 WIRELESS ACCESS POINT NORMAL POWER 802.11 b/g 5dBi EU, IP65
FZ-OW-2000APPNG54AU FZ-OW-2000 WIRELESS ACCESS POINT NORMAL POWER 802.11 b/g 5dBi US, IP54
FZ-OW-2000APPNG54AE FZ-OW-2000 WIRELESS ACCESS POINT NORMAL POWER 802.11 b/g 5dBi EU, IP54

FZ-OW-3000DAPP – 802.11a/b/g Dual Radio Outdoor Multi-Function Wireless Access Point

Description
The FZ-OW-3000DAPP is an IEEE802.11 a/b/g Dual Radio Outdoor Multi-Function Wireless Access Point with Power over Ethernet (PoE)supported. The FZ-OW-3000DAP also operates as multi-function wireless system that included MESH, Point-to-Point/ Point-to-Multipoint Bridge, Access Point,Wireless Client and Repeater. The dual radio of FZ-OW-3000DAP can be functioned dual band and maintain each radio up to 54Mbps data rate simultaneously on both directions. In addition, FZ-OW-3000DAP provides dual Ethernet ports, and the ETH0 can forwarding the PoE power to other PD devices.

Key Features
n Dual Radio: Two High-power Radio for backhaul and local access.
n Multi operating modes support: MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge,
n AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP , AP_WDS_BRG,
AP4_WDS_BRG
n Bandwidth limitation: Traffic shaping by IP in MESH and ROUTE model up to 30 list
n Power over Ethernet design
n PoE power forwarding
n Mac filtering/ IP Filtering
n Qos (WMM) Enhance performance and density
n LLDP Link Layer Discovery Protocol
n Up to 8 SSID support.
n Supports WEP 64/128, WPA, WPA2 Authentication
n Support SNMP V1/V2c/V3
n Support STP/RSTP
n IP65 Industrial standard

Technical Specifications

 

General 

Data Rates 

802.11 b: 1, 2, 5.5, 11Mbps 

802.11g: 6,9,12,18,24,36,48,54 Mbps  

802.11a: 6,9,12,18,24,36,48,54 Mbps  

Standards 

IEEE802.11 a/b/g, IEEE802.1x, IEEE802.3, IEEE802.3u, 

IEEE802.3af  

Power Requirements 

Active Ethernet  (Power over Ethernet) 48 VDC/0.375A 

External Unit: Auto sensing 100/240 VAC; 50/60 Hz 

Regulation 

Certifications 

FCC/CE (by request), IP65

Hard Ware Information 

CPU 

Intel IXP 425 533MHz network processor 

Interface 

1* RJ-45 Ethernet Port (for POE input)

1* RJ-45 Ethernet Port (for POE power forwarding)

Flash 

16M bytes 

Memory 

64 MB SDRAM 

RF Information 

Output power (±1.5dBm)

802.11a          [email protected]       

[email protected]          

[email protected]            

[email protected]             

802.11b          [email protected]

802.11g          [email protected]~24Mps

[email protected]

[email protected] 

[email protected]

Sensitivity

(Typical)

802.11a -92dBm @ 6Mbps, -72dBm @ 54Mbps

802.11b -95dBm @ 1Mbps, -90dBm @ 11Mbps

802.11g -92dBm @ 6Mbps, -73dBm @ 54Mbps

Networking Information 

Topology 

Ad-Hoc, Infrastructure 

Operation Mode 

MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge, AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP , WDS (Repeater)

SSID 

Multiple SSID 

Interface 

Two 10/100Mbps RJ-45 LAN Ports 

Security 

• IEEE802.1x / RADIUS Client (TTLS, PEAP) Support in AP Mode 

• IEEE802.1x Supplicant (TTLS, PEAP) support in Client Bridge 

Mode 

• WPA-WiFi Protected Access  

• WPA2 (802.11i) 

• WEP 64,128 bits

• IP address filtering  

• MAC address filtering 

• Layer2 Isolation 

• VLAN  tunneling Support 

• Hide SSID 

• Rogue AP Scan

STP/RSTP

STP/RSTP

QOS

WMM

Bandwidth limitation

Traffic shaping by IP for each client in Route mode only 30 list

Management Features 

IP Auto-configuration 

DHCP client/ server 

SNMP 

V1/V2c/V3

LLDP

Link Layer Discovery Protocol

NTP server 

Support NTP client

Remote Configuration 

• Web-based configuration (HTTP/HTTPS) 

 

Firmware Upgrade 

Upgrade firmware via WEB and TFTP/FTP 

Max Client 

32 users (simultaneously) per radio 

Network management

Ruby-View

Hard Ware Specification

Physical Dimensions

230(L)mm *230 (W)mm *60 (H)mm

Weight

1124g

Environmental Temperature Range

-Operating: -20°C to 70°C 
-Storage: -40°C to 80°C

Humidity (non-condensing)

5%~95% Typical

Package Contents

 

–1 x FZ-OW-3000DAPP Outdoor Wireless Access Point unit 
100~240VAC, 50~60Hz AC to 48V/0.375A DC switching adapter

– Inline Power Injector (PoE)


–Grounding 
wire 1.8m

RJ-45 CAT-5 Cross-over Ethernet cable 1.8m
1 x RJ-45 CAT-5 Ethernet cable 30m  (optional)

2 x Strain Relief
 1 x User manual CD

– 2 x 7 dBi dual band Omni antenna

1 x Pole mount kit and Screws pack

 

Ordering Information

FZ-OW-3000DAPP

FZ-OW-3000DAPP Outdoor Wireless Dual Radio Access Point High Power 802.11 a/b/g IP65 Plastic

FZ-UW-3001 – FZ-UW-3001 Un-interrupted Wireless System

Description
The FZ-UW-3001 is an Un-interrupted Wireless System that provide up to 8 hours wireless function well when AC power down. It also can support remote system reset just in case.

The FZ-UW-3001 is an IEEE802.11 a/b/g Dual Radio Outdoor Multi-Function Wireless Access Point with Power over Ethernet (PoE) supported.

The FZ-UW-3001 also operates as multi-function wireless system that included MESH, Point-to-Point/ Point-to-Multipoint Bridge, Access Point, Wireless Client, and Repeater.

The dual radio of FZ-UW-3001 can be functioned dual band and maintain each radio up to 54Mbps data rate simultaneously on both directions. In addition, FZ-UW-3001 provides dual Ethernet ports, and the ETH0 can forwarding the PoE power to other PD devices.

Key Features
n Dual Radio: Two Radio IEEE 802.11 a/b/g for backhaul and local access
n Up to 8 hours operation time after AC Power down
n AC Power off Alarm
n Remote system reset
n Multi operating modes support: MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge,
n AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP , AP_WDS_BRG, AP4_WDS_BRG
n Bandwidth limitation
n PoE power forwarding
n Mac Filtering / IP Filtering
n QOS (WMM) Enhance performance and density
n LLDP Link Layer Discovery Protocol
n Multiple SSID
n Supports WEP 64/128, WPA, WPA2 Authentication
n Support SNMP V1/V2c/V3
n Support STP/RSTP
n IP56 Industrial standard

Technical Specifications

General 

Data Rates 

802.11 b: 1, 2, 5.5, 11Mbps ; 802.11g: 6,9,12,18,24,36,48,54 Mbps  

802.11a: 6,9,12,18,24,36,48,54 Mbps  

Standards 

IEEE802.11 a/b/g, IEEE802.1x, IEEE802.3, IEEE802.3u

Power Requirements 

100/240 VAC; 50/60 Hz 

Regulation Certifications

FCC/CE (by request), IP56

Hard Ware Information 

CPU 

Intel IXP 425 533MHz network processor 

Interface 

2 x 10/100Mbps RJ-45 LAN Port 

Flash 

16M bytes 

Memory 

64 MB SDRAM 

RF Information 

Sensitivity

(Typical)

802.11a -92dBm @ 6Mbps, -72dBm @ 54Mbps

802.11b -95dBm @ 1Mbps, -90dBm @ 11Mbps

802.11g -92dBm @ 6Mbps, -73dBm @ 54Mbps

Output power (±1.5dBm)

802.11a          [email protected]       

[email protected]          

[email protected]            

[email protected]             

802.11b          [email protected]

802.11g          [email protected]~24Mps

[email protected]

[email protected] 

[email protected]

Networking Information 

Topology 

Ad-Hoc, Infrastructure 

Operation Mode 

MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge, AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP , WDS (Repeater)

SSID 

Multiple SSID 

Interface 

2 x 10/100Mbps RJ-45 LAN Port  (1 PD and 1 PSE) 

Security 

• IEEE802.1x / RADIUS Client (TTLS, PEAP) Support in AP Mode 

• IEE802.1x Supplicant (TTLS, PEAP) support in Client Bridge Mode 

• WPA-WiFi Protected Access  

• WPA2 (802.11i) 

• WEP 64,128 bits 

• MAC address filtering 

• Layer2 Isolation 

• VLAN  tunneling Support 

• Hide SSID 

LLDP

Link Layer Discovery Protocol

AP Scan

Rogue AP Scan

STP/RSTP

STP/RSTP

QOS

WMM

Mac Filter

Setting 15 Mac Address

Bandwidth limitation

Traffic shaping by IP for each client in Route mode only 30 list

Management Features 

IP Auto-configuration 

DHCP client/ server 

SNMP 

V1/V2c/V3

NTP 

Support NTP client

Remote Configuration 

• Web-based configuration (HTTP) 

• Telnet 

Firmware Upgrade 

Upgrade firmware via WEB and TFTP/FTP 

Power Control

Ethernet PoE power control

Max Client 

32 users (simultaneously) per radio 

Physical                                                                      

Physical Dimensions

405(L)mm *345 (W)mm *210 (H)mm

Environmental

Environmental Temperature Range

-Operating: -20°C to 60°C 

-Storage:  -20°Cto 70°C

Humidity (non-condensing)

5%~95% Typical

Accessories

Package Contents

n          Water tight Outdoor Wireless Access point unit

n          1.8m Ethernet Cable 

n          User’s manual CD-ROM Wall mounting kit     

n          7 dBi Omni dual band antenna *2

n          Power Cord

 Ordering Information Model

FZ-UW-3001

FZ-UW-3001 Un-interrupted Wireless System Dual Radio High Power 802.11 a/b/g IP56

FZ-OW-C300 – Removable Roaming Access Point

Description
The FZ-OW-C300 is a Removable Access Point that powered by car’s cigarette system. It can easy set up a wireless networking in open public space, such as exhibition, or emergency case.

The FZ-OW-C300 also operates as multi-function wireless system that included MESH, Point-to-Point/ Point-to-Multipoint Bridge, Access Point, Wireless Client, and Repeater.

The dual radio of FZ-OW-C300 can be functioned dual band and maintain each radio up to 54Mbps data rate simultaneously. In addition, FZ-OW-C300 provides dual Ethernet ports, and the ETH0 can forwarding the PoE power to other PD devices.

Key Features
• Dual Radio: Two Radio IEEE 802.11 a/b/g for backhaul and local access.
• Power supply: 10-30VDC car cigarette power
• Multi operating modes support: MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge,
AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP, AP_WDS_BRG,
AP4_WDS_BRG
• Bandwidth limitation: Traffic shaping by IP in MESH and ROUTE model up to 30 List
• PoE power forwarding
• Mac Filtering / IP Filtering
• QOS (WMM) Enhance performance and density
• LLDP Link Layer Discovery Protocol
• Multiple SSID 8 SSID support.
• Supports WEP 64/128, WPA, WPA2 Encryption
• Support SNMP V1/V2c/V3
• Support STP/RSTP
• IP65 Industrial standard

Technical Specifications

General 

Data Rates 

802.11 b: 1, 2, 5.5, 11Mbps 

802.11g: 6,9,12,18,24,36,48,54 Mbps  

802.11a: 6,9,12,18,24,36,48,54 Mbps  

Standards 

IEEE802.11 a/b/g, IEEE802.1x, IEEE802.3, IEEE802.3u,802.11i

Power Requirements 

10 ~ 30VDC

Regulation Certifications

FCC/CE/NCC (by request)

Hard Ware Information 

CPU 

Intel IXP 425 533MHz network processor 

Interface 

1* RJ-45 Ethernet Port

1* RJ-45 Ethernet Port (for POE power forwarding)

Flash 

16Mb 

Memory 

64MB SDRAM 

RF Information 

Output power (+1.5/-2dBm)

802.11a [email protected]       

[email protected]          

[email protected]            

[email protected]             

802.11b [email protected]

802.11g [email protected]~24Mbps

[email protected]

[email protected] 

[email protected]

Sensitivity

(Typical)

802.11a -91dBm @ 6Mbps, -72dBm @ 54Mbps

802.11b -97dBm @ 1Mbps, -88dBm @ 11Mbps

802.11g -91dBm @ 6Mbps, -74dBm @ 54Mbps

Networking Information 

Topology 

Ad-Hoc, Infrastructure 

Operation Mode 

MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge, AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP ,VLAN-AP, AP_WDS_BRG, AP4_WDS_BRG

SSID 

Multiple SSID

Interface 

Two 10/100Mbps RJ-45 LAN Ports 

Security 

• IEEE802.1x / RADIUS Client (TTLS, PEAP) Support in 
  
AP Mode 

• IEE802.1x Supplicant (TTLS, PEAP) support in
  
Client Bridge Mode 

• WPA-WiFi Protected Access  

• WEP 64,128 bits 

• IP address filtering 

• MAC address filtering 

• Layer2 Isolation 

• VLAN  tunneling Support 

• Hide SSID 

• Rogue AP Scan

STP/RSTP

STP/RSTP

QOS

WMM

Bandwidth limitation

Traffic shaping by IP for each client in Route mode up to 30 list

Management Features 

IP Auto-configuration 

DHCP client/ server 

SNMP 

V1/V2c/V3

NTP 

Support NTP client

Remote Configuration 

Web-based configuration (HTTP/HTTPS) 

Firmware Upgrade 

Upgrade firmware via WEB, and TFTP /FTP

Max Client 

32 users (simultaneously) per radio 

Network management

Ruby-View

Hard Ware Specification

 

Physical Dimensions

230(L)mm *230 (W)mm *60 (H)mm

 

Environmental Temperature Range

Operating: -20°C to 70°C 
Storage: -40°Cto 80°C

 

Humidity (non-condensing)

5%~95% Typical

 

Package Contents

1.      1 x FZ-OW-C300 Outdoor Wireless Access Point unit

2.      1 x Car cigarette power cord

3.      1 x RJ-45 CAT-5 Cross-over Ethernet cable 1.8m

4.      1 x RJ-45 CAT-5 Ethernet cable 30m (optional)

5.      2 x Strain Relief

6.      1 x User manual CD

7.      1 x 5/7dBi dual band Omni Antenna (optional)

8.      1 x 10/15dBi dual band Patch Antenna (optional)

9.      2 x Magnetic seat with 2M RF cable (optional)

10.  1 x Pole mount kit and Screws pack (optional)

 

 Ordering Information

FZ-OW-C300

FZ-OW-C300 Removable Access Point Dual Radio High Power 802.11 a/b/g IP65

FZ-OW-3000DR – FZ-OW-3000DR Outdoor Wireless Dual Radio with Roaming Access Point High Power 802.1

Description
The FZ-OW-3000DR is an IEEE802.11 a/b/g Dual Radio Outdoor Wireless Roaming Access Point with Power over Ethernet (PoE) supported.

The FZ-OW-3000DR also operates as multiple and roaming functions wireless system that included MESH, Point-to-Point/ Point-to-Multipoint Bridge, Access Point, Wireless Client, Repeater and Roaming.

The dual radio of FZ-OW-3000DR can be functioned dual band and maintained each radio up to 54Mbps data rate simultaneously. In addition, FZ-OW-3000DR provides dual Ethernet ports, the eth0 port can forwarding the power over Ethernet to other PD devices.

Key Features
• Dual Radio: Two Radio IEEE 802.11 a/b/g for backhaul and local access.
• Multi operating models support: MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge,
AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP, AP_WDS_BRG,
AP4_WDS_BRG, AP_ROAM_BRG, CB_ROAM_BRG
• Support 100ms R-Roaming with WPA enterprise security
• Support zero-configuration for Roaming
• Bandwidth limitation :Traffic shaping by IP in MESH and ROUTE
model up to 30 list
• Power over Ethernet Compliant
• PoE power forwarding
• Mac Filtering / IP Filtering
• QOS (WMM) Enhance performance and density
• LLDP Link Layer Discovery Protocol

• Up to 8 SSID support
• Link Redundancy: Secondary SSID and MESH mode (AODV and OLSR),
recovery link within 30 seconds
• Supports Hotspot in Mesh OLSR model
• Supports Antenna alignment in AP_CB Bridge model
• Supports Turbo a/g
• Supports WEP 64/128, WPA, WPA2 Authentication
• Support SNMP V1/V2c/V3
• Support STP/RSTP
• Support Lightening Protection

Technical Specifications

General 

Data Rates 

802.11 b: 1, 2, 5.5, 11Mbps 

802.11g: 6,9,12,18,24,36,48,54,108 Mbps  

802.11a: 6,9,12,18,24,36,48,54,108 Mbps  

Standards 

IEEE802.11 a/b/g, IEEE802.1x, IEEE802.3, IEEE802.3u, IEEE802.3i 

Power Requirements 

Active Ethernet  (Power over Ethernet ) 48 VDC/1A 

External Unit: Auto sensing 100/240 VAC; 50/60 Hz 

Regulation Certifications 

NCC LP002, and FCC Part 15 Class A, EN300328& EN301893, EN60950-1, EN301489-1/17, IP68 compliant

Hard Ware Information 

CPU 

Intel IXP 425 533MHz network processor 

Interface 

1* RJ-45 Ethernet Port

1* RJ-45 Ethernet Port (for POE power forwarding)

Flash 

16 MB  

Memory 

64 MB SDRAM 

RF Information 

Output power (+1.5/-2dBm)

802.11a [email protected]       

[email protected]          

[email protected]            

[email protected]             

802.11b [email protected]

802.11g [email protected]~24Mbps

[email protected]

[email protected] 

[email protected]

Sensitivity

(Typical)

802.11a -91dBm @ 6Mbps, -72dBm @ 54Mbps

802.11b -97dBm @ 1Mbps, -88dBm @ 11Mbps

802.11g -91dBm @ 6Mbps, -74dBm @ 54Mbps

Networking Information 

Topology 

Ad-Hoc, Infrastructure 

Operation Models 

MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge, AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP , AP_WDS_BRG, AP4_WDS_BRG, AP_ROAM_BRG, CB_ROAM_BRG

SSID 

8 SSID 

Interface 

Two 10/100Mbps RJ-45 LAN Ports

Security 

• IEEE802.1x / RADIUS Client (TTLS, PEAP) Support in 
  
AP Mode 

• IEE802.1x Supplicant (TTLS, PEAP) support in
  
Client Bridge Mode 

• WPA-WiFi Protected Access  

• WEP 64,128 bits 

• IP address filtering 

• MAC address filtering 

• Layer2 Isolation 

• VLAN  tunneling Support 

• Hide SSID 

• Rogue AP Scan

Link Redundancy

Secondary SSID in CB model, recovery link within 1 minute 30 seconds

STP/RSTP

STP/RSTP

QOS

WMM

Bandwidth limitation

Traffic shaping by IP for each client in Route mode up to 30 list

Management Features 

IP Auto-configuration 

DHCP client/ server 

SNMP 

V1/V2c/V3

LLDP

Link Layer Discovery Protocol

NTP server 

Support NTP client

Remote Configuration 

Web-based configuration (HTTP/HTTPS) 

Firmware Upgrade 

Upgrade firmware via WEB, TFTP and FTP 

Max Client 

32 users (simultaneously) per radio 

Network management

Ruby-View, Display Link Quality, Signal Level, Noise Level, Transmit Speed, Output Power, Number of total transmit and receive packets

Diagnostic

Tools

Ping

Neighbors

Antenna alignment in AP_CB Bridge mode

Hard Ware Specification 

Physical Dimensions

284(L)mm *251 (W)mm *67 (H)mm

Environmental Temperature Range

Operating: -30°C to 80°C 
Storage: -40°Cto 80°C

Humidity (non-condensing)

5%~95% Typical

Package Contents

1.         1 x Water tight Outdoor Wireless Access Point unit

2.         1 x 100~240VAC, 50~60Hz AC to 48V/1A Power Supply

3.         1 x Power Cord

4.         1 x Grounding wire 1.8m

5.         1 x RJ-45 CAT-5 Cross-over Ethernet cable 1.8m

6.         1 x RJ-45 CAT-5 Ethernet cable 30m

7.         2 x Strain Relief

8.         1 x User manual CD

9.         2 x 4.5/7dBi dual band Omni Antenna

10.      2 x Pole mount kit and Screws pack

11.      2 x Wall mount kit

 Ordering Information

FZ-OW-3000DR

FZ-OW-3000DR Outdoor Wireless Dual Radio with Roaming Access Point High Power 802.11 a/b/g IP68 Aluminum

FZ-OW-C300R – FZ-OW-C300R Removable Roaming Access Point Dual Radio High Power 802.11 a/b/g IP65

Description
The FZ-OW-C300R is an IEEE802.11 a/b/g Dual Radio Outdoor Removable Roaming Access Point that powered by vehicle’s cigarette system. It can easy set up a wireless networking in open public space, such as exhibition, or emergency case.

The FZ-OW-C300R also operates as multi-function wireless system that included MESH, Point-to-Point/ Point-to-Multipoint Bridge, Access Point, Wireless Client, Repeater and
Roaming.

The dual radio of FZ-OW-C300R can be functioned dual band and maintain each radio up to 54Mbps data rate simultaneously. In addition, FZ-OW-C300R provides dual Ethernet ports, and the ETH0 can forwarding the PoE power to other PD devices.

Key Features
• Dual Radio: Two Radio IEEE 802.11 a/b/g for backhaul and local access.
• Power supply: 10-30VDC car cigarette power
• Multi operating models support: MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge,
AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP , AP_WDS_BRG,
AP4_WDS_BRG, AP_ROAM_BRG, CB_ROAM_BRG
• Support 100ms R-Roaming with WPA enterprise security
• Support zero-configuration for Roaming
• Bandwidth limitation :Traffic shaping by IP in MESH and ROUTE
model up to 30 list
• PoE power forwarding
• Mac Filtering / IP Filtering
• QOS (WMM) Enhance performance and density
• LLDP Link Layer Discovery Protocol
• Up to 8 SSID support
• Link Redundancy: Secondary SSID and MESH mode (AODV and OLSR), recovery link within 30 seconds
• Supports Hotspot in Mesh OLSR model
• Supports Antenna alignment in AP_CB Bridge model
• Supports Turbo a/g
• Supports WEP 64/128, WPA, WPA2 Encryption
• Support SNMP V1/V2c/V3
• Support STP/RSTP
• IP65 Industrial standard

Technical Specifications

General 

Data Rates 

802.11 b: 1, 2, 5.5, 11Mbps 

802.11g: 6,9,12,18,24,36,48,54,108 Mbps  

802.11a: 6,9,12,18,24,36,48,54,108 Mbps  

Standards 

IEEE802.11 a/b/g, IEEE802.1x, IEEE802.3, IEEE802.3u, IEEE802.3i 

Power Requirements 

10 ~ 30VDC

Regulation Certifications

FCC/CE(by request) , IP65 compliant

Hard Ware Information 

CPU 

Intel IXP 425 533MHz network processor 

Interface 

1* RJ-45 Ethernet Port

1* RJ-45 Ethernet Port (for POE power forwarding)

Flash 

16 MB  

Memory 

64 MB SDRAM 

RF Information 

Output power (+1.5/-2dBm)

802.11a [email protected]       

[email protected]           

[email protected]            

[email protected]             

802.11b [email protected]

802.11g [email protected]~24Mbps

[email protected]

[email protected] 

[email protected]

Sensitivity

(Typical)

802.11a -91dBm @ 6Mbps, -72dBm @ 54Mbps

802.11b -97dBm @ 1Mbps, -88dBm @ 11Mbps

802.11g -91dBm @ 6Mbps, -74dBm @ 54Mbps

Networking Information 

Topology 

Ad-Hoc, Infrastructure 

Operation Models

MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge, AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP, AP_WDS_BRG, AP4_WDS_BRG, AP_ROAM_BRG, CB_ROAM_BRG

SSID 

8 SSID

Interface 

Two 10/100Mbps RJ-45 LAN Ports 

Security 

• IEEE802.1x / RADIUS Client (TTLS, PEAP) Support in 
  
AP Mode 

• IEE802.1x Supplicant (TTLS, PEAP) support in
  
Client Bridge Mode 

• WPA-WiFi Protected Access 

• WEP 64,128 bits 

• IP address filtering 

• MAC address filtering 

• Layer2 Isolation 

• VLAN  tunneling Support 

• Hide SSID 

• Rogue AP Scan

Link Redundancy

Secondary SSID in CB model, recovery link within 1 minute

STP/RSTP

STP/RSTP

QOS

WMM

Bandwidth limitation

Traffic shaping by IP for each client in Route mode up to 30 list

Management Features 

IP Auto-configuration 

DHCP client/ server 

SNMP 

V1/V2c/V3

LLDP

Link Layer Discovery Protocol

NTP server 

Support NTP client

Remote Configuration 

Web-based configuration (HTTP/HTTPS)

Firmware Upgrade 

Upgrade firmware via WEB, TFTP and FTP

Max Client 

32 users (simultaneously) per radio

Network management

Ruby-View, Display Link Quality, Signal Level, Noise Level, Transmit Speed, Output Power, Number of total transmit and receive packets

Diagnostic

Tools

Ping

Neighbors

Antenna alignment in CB model

Hard Ware Specification

 

Physical Dimensions

230(L)mm *230 (W)mm *60 (H)mm

 

Environmental Temperature Range

-Operating: -20°C to 70°C 
-Storage: -40°Cto 80°C

 

Humidity (non-condensing)

5%~95% Typical

 

Package Contents

1.      1 x FZ-OW-C300 Outdoor Wireless Access Point unit

2.      1 x Car cigarette power cord

3.      1 x RJ-45 CAT-5 Cross-over Ethernet cable 1.8m

4.      1 x RJ-45 CAT-5 Ethernet cable 30m (optional)

5.      2 x Strain Relief

6.      1 x User manual CD

7.      1 x 5/7dBi dual band Omni Antenna (optional)

8.      1 x10/15dBi dual band Patch Antenna (optional)

9.      2 x Magnetic seat with 2M RF cable (optional)

10.  1 x Pole mount kit and Screws pack (optional)

 

 Ordering Information

FZ-OW-C300R

FZ-OW-C300R Removable Roaming Access Point Dual Radio High Power 802.11 a/b/g IP65

FZ-UW-3001R Un-interrupted Roaming Wireless System Dual Radio High Power 802.11 a/b

Description
The FZ-UW-3001R is an Un-interrupted Roaming Wireless System that provide up to 8 hours wireless function well when AC power down. It also can support remote system reset just in case.

The FZ-UW-3001R is an IEEE802.11 a/b/g Dual Radio Outdoor multiple and roaming Function Wireless Access Point with Power over Ethernet (PoE) supported.

The FZ-UW-30001R also operates as multi-function wireless system that included MESH, Point-to-Point/ Point-to-Multipoint Bridge, Access Point, Wireless Client, Repeater and Roaming.

The dual radio of FZ-UW-3001R can be functioned dual band and maintained each radio up to 54Mbps data rate simultaneously. In addition, FZ-UW-3001R provides dual Ethernet ports, the eth0 port can forwarding the power over Ethernet to other PD devices.

Key Features
• Dual Radio: Two Radio IEEE 802.11 a/b/g for backhaul and local access
• Up to 8 hours operation time after AC Power down
• AC Power off Alarm
• Remote system rese
• Multi operating models support: MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge, AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP , AP_WDS_BRG, AP4_WDS_BRG, AP_ROAM_BRG, CB_ROAM_BRG
• Support 100ms R-Roaming with WPA enterprise security
• Support zero-configuration for Roaming
• Bandwidth limitation :Traffic shaping by IP in MESH and ROUTE
model up to 30 list
• Power over Ethernet Compliant
• PoE power forwarding
• Mac Filtering / IP Filtering
• QOS (WMM) Enhance performance and density
• LLDP Link Layer Discovery Protocol
• Up to 8 SSID support
• Link Redundancy: Secondary SSID and MESH mode (AODV and OLSR),
recovery link within 30 seconds
• Supports Hotspot in Mesh OLSR model
• Supports Antenna alignment in AP_CB Bridge model
• Supports Turbo a/g
• Supports WEP 64/128, WPA, WPA2 Encryption
• Support SNMP V1/V2c/V3
• Support STP/RSTP
• IP56 Industrial standard

Technical Specifications

General 

Data Rates 

802.11 b: 1, 2, 5.5, 11Mbps 

802.11g: 6,9,12,18,24,36,48,54,108 Mbps  

802.11a: 6,9,12,18,24,36,48,54,108 Mbps  

Standards 

IEEE802.11 a/b/g, IEEE802.1x, IEEE802.3, IEEE802.3u, IEEE802.3i 

Power Requirements 

100/240 VAC; 50/60 Hz 

Regulation Certifications

FCC/CE (by request), IP56 compliant

Hard Ware Information 

CPU 

Intel IXP 425 533MHz network processor 

Interface 

1* RJ-45 Ethernet Port (for POE input)

1* RJ-45 Ethernet Port (for POE power forwarding)

Flash 

16 MB  

Memory 

64 MB SDRAM 

RF Information 

Output power (+1.5/-2dBm)

802.11a [email protected]       

[email protected]          

[email protected]            

[email protected]              

802.11b [email protected]

802.11g [email protected]~24Mbps

[email protected]

[email protected] 

[email protected]

Sensitivity

(Typical)

802.11a -91dBm @ 6Mbps, -72dBm @ 54Mbps

802.11b -97dBm @ 1Mbps, -88dBm @ 11Mbps

802.11g -91dBm @ 6Mbps, -74dBm @ 54Mbps

Networking Information 

Topology 

Ad-Hoc, Infrastructure 

Operation Models 

MESH_AP (OLSR), MESH_AP (AODV), AP-Bridge, AP-CB-Bridge, AP-CB- route, CB-CB- route, VLAN-AP , AP_WDS_BRG, AP4_WDS_BRG, AP_ROAM_BRG, CB_ROAM_BRG

SSID 

8 SSID 

Interface 

Two 10/100Mbps RJ-45 LAN Ports

Security 

• IEEE802.1x / RADIUS Client (TTLS, PEAP) Support in 
  
AP Mode 

• IEE802.1x Supplicant (TTLS, PEAP) support in
  
Client Bridge Mode 

• WPA-WiFi Protected Access

• WEP 64,128 bits 

• IP address filtering 

• MAC address filtering 

• Layer2 Isolation 

• VLAN  tunneling Support 

• Hide SSID 

• Rogue AP Scan

Link Redundancy

Secondary SSID in CB model, recovery link within 30 seconds

STP/RSTP

STP/RSTP

QOS

WMM

Bandwidth limitation

Traffic shaping by IP for each client in Route mode only 30 list

Management Features 

IP Auto-configuration 

DHCP client/ server 

SNMP 

V1/V2c/V3

LLDP

Link Layer Discovery Protocol

NTP server 

Support NTP client

Remote Configuration 

Web-based configuration (HTTP/HTTPS) 

Firmware Upgrade 

Upgrade firmware via WEB, TFTP and FTP 

Max Client 

32 users (simultaneously) per radio 

Network management

Ruby-View, Display Link Quality, Signal Level, Noise Level, Transmit Speed, Output Power, Number of total transmit and receive packets

Diagnostic

Tools

Ping

Neighbors

Antenna alignment in AP_CB Bridge mode

Hard Ware Specification

Physical Dimensions

405(L)mm *345 (W)mm *210 (H)mm

Environmental Temperature Range

-Operating: -20°C to 60°C 

-Storage:  -20°Cto 70°C

Humidity (non-condensing)

5%~95% Typical

Package Contents

1. 1x Water tight Outdoor Wireless Access point unit

2. 1x 1.8m Ethernet Cable 

3. 1x User’s manual CD-ROM 
4. 1x Wall mounting kit     

5. 2x 4.5/7 dBi Omni dual band antenna

6. 1x Power Cord

Ordering Information

FZ-UW-3001R

FZ-UW-3001R Un-interrupted Roaming Wireless System Dual Radio High Power 802.11 a/b/g IP56