Fast Ethernet Switch

FZ-ES-2310C – 8-Port L2 Managed Fast Ethernet Switch + 2 TP/SFP Gigabit Dual Media

Description
FZ-ES-2310C is a Managed Fast Ethernet switch that supports SNMP, Web UI and CLI management interface and with 8 10/100Base-TX (RJ-45 connectors) and 2 Gigabit dual media (RJ-45/SFP) ports. It is a standard switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. In addition, the switch implements the QoS (Quality of Service), VLAN, MAC Filtering Policy, Port Mirror, VLAN and full L2 protocols. It has a rich feature set suitable for streaming VoIP, video, and data traffics for multimedia applications.
In this switch, Port 9, 10 support two types of media — TP and SFP Fiber (LC, BiDi-LC) both ports support 10/100/1000Mbps TP or 1000Mbps SFP Fiber with auto-detected function. 1000Mbps SFP Fiber transceiver is used for high-speed connection expansion.

 

Key Benefits

  • QoS with four priority queues

    • The QoS(Quality Of Service) feature provides four internal queues to support four different classifications of traffic. High priority packet streams experience less delay inside the switch, which supports lower latency for certain delay-sensitive traffic. The FZ-ES-2310C can classify the packet as one of the four priorities according to vip port, 802.1p priority tag, DiffServ and/or IP TOS. The QoS operates at full wire speed. The actual scheduling at each egress port can be based upon a strict priority, weighted round robin or a mix of both.
  • Port Mirroring

    • This mechanism helps track network errors or abnormal packet transmission without interrupting the flow of data. Allow ingress traffic to be monitored by a single port that is defined as mirror capture port. The mirror capture port can be any 10/100 port, 10/100/1000 port. Mirroring multiple ports is possible but can create congestion at the mirror capture port.
  • Q-in-Q VLAN for performance & security
    • The VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance. Q-in-Q, the use of double VLAN tags is an efficient method for enabling Subscriber Aggregation. This is very useful in the MAN.
  • Isolated Group, provides protection for certain ports

    • The isolated group feature allows certain ports to be designated as protected. All other ports are non-isolated. Traffic between isolated group members is blocked. Traffic can only be sent from isolated group to non-isolated group.
  • Mac-based 802.ad LACP with automatic link fail-over

    • Dynamic fail-over means packets will not get assigned to any trunk member port that has failed. If one of the ports were to fail, traffic will automatically get distributed to the remaining active ports.
  • 802.1x Access Control improves network security

    • 802.1x features enable user authentication for each network access attempt. Port security features allow you to limit the number of MAC addresses per port in order to control the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the number of access stations.
  • 802.1d Compatible & 802.1w Rapid Spanning Tree
    • For mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in event of any fail-over switch on the network.
  • 2 dual media ports for flexible fiber connection

    • Port 9, 10 dual media ports are provided for flexible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or long distance fiber backbone attachment. Use of the SFP will disable their corresponding built-in 10/100/1000Base-T connections.
  • Broadcast/Multicast/unknown-unicast Storm Control

    • To limit too many broadcast/multicast/unknown-unicast flooding in the network, broadcast/multicast storm control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured upper threshold.

 

Features

  • Port Mirroring helps supervisor monitoring network
  • 2 dual media ports for flexible fiber connection
  • QoS with four priority queues
  • Q-i-Q VLAfor performance & security
  • IEEE802.1x Access Control improves network security
  • IEE802.1d Compatible & 802.1w Rapid Spanning Tree
  • Unknown Unicast/Broadcast/Multicast storm control

 

Technical Specifications

  • Standard compliance                   
    •  IEEE 802.3 10Base-T (twisted-pair copper)
    • IEEE 802.3u 100Base-TX (twisted-pair copper)
    • IEEE 802.3ab 1000Base-TX (twisted-pair copper)
    • IEEE 802.3z 1000Base-X Ethernet
    •  IEEE 802.3x flow control capability
    • ANSI/IEEE 802.3 auto-negotiation
    •  IEEE 802.1q VLAN
    • IEEE 802.1p Class of Service
    • IEEE 802.1x Access Control
    • IEEE 802.1d Spanning Tree
    • IEEE 802.1w Rapid Spanning Tree
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
  • RoHS Compliance
  • Subscriber Interface
    • 8-port 10/100Mbps and 2 Gigabit Ethernet ports.
    • Port 9,10 are Gigabit TP/SFP Fiber auto sense
    • Auto-Negotiation and Auto-MDIX
    •  Back pressure flow control for half duplex.
    • IEEE 802.3x compliant for full duplex
    • Connector: 8 RJ-45 and 2 dual media, RJ-45/SFP
  • Performance
    • Switching capacity:
      • Non-blocking switch fabric supports up to 8 FE+2GbE ports
      • 8 K MAC addresses
      • 256K packet buffer and 128K control memory
      • The maximum throughput is 5.6Gbps
      •  With 64 bytes packets throughput is 4.166Mpps
    • VSM(Virtual Stacking Management)
      •  Up to 16 switches can be managed via Single IP limited to any specific FiberZone models.
      • Virtual stacking, no extra stacking hardware is required
      • Distributed stacking, no physical central wiring closet is needed
    • VLAN
      • Supports SVL/IVL configuration to meet your VLAN requirement
      • Port-base VLAN
      • IEEE802.1q tag-base VLAN, 4094 max, up to 4k active VLANs including static plus dynamic entry
      • Flooding unknown VLAN frame setting, can flood packet with some VLAN tag associated to a invalid/inactive VLAN
      • In tag-base VLAN, supports egress/ingress packet filter
      • Q-in-Q is an efficient method for enabling Subscriber Aggregation
  • QoS
    • Port Based (VIP Port), 802.1p , TOS and Diffserv(IPv4) based QoS packet classification
    • Supports four level priority queues to prioritize in-bound and out-bound traffic
    • Supports two scheduling, WRR and Strict
  • Broadcast Storm
    • Multicast/Broadcast/Unknown-Unicast Storm suppression.
  • Port Mirroring
    • Support 1: N RX port mirroring
    • Supports port sniffer function with 3 modes:
    • (TX Monitor Mode, RX Monitor Mode and TX-RX pair Monitor Mode)
  • Isolated Group
    • Provide one group allows certain ports to be designated as protected
  • Restricted Group
    • Can decide the direction of transmitting packets for the specific port
  • Protocol
    • LACP
      •  2 Fast Ethernet +1 Gigabit Ethernet groups
      • Per-group max 4 member
      • Provides DA, SA and DA+SA Mac-based trunking with automatic link fail-over
    • GVRP/GARP
      • 802.1q with GVRP/ GARP
    • Multicasting
      • Supports IGMP snooping including active and passive mode
    • STP/RSTP
      • 802.1d/1w
  • Network Security
    • 802.1x access control
    • Isolated group
    • Management Access Policy Control
    • Static MAC, to limit which MAC addresses can pass through or not
    • MAC addresses learning limit, to set up the maximum amount of MAC that each port can learn

Snmpv1,v2c Network Management

RFC 1213 MIB (MIB-II)

RFC 1757 RMON MIB

Interface MIB

Statistics Group 1

Address Translation MIB

History Group 2

IP MIB

Alarm Group 3

ICMP MIB

Event Group 9

TCP MIB

RFC 1493 Bridge MIB

UDP MIB

RFC 1643 Ethernet MIB

SNMP MIB

Enterprise MIB

Specification

LED Description

LED

Color

                Function

System LED

CPURUN

Green

Lit when CPU is on and good

POWER

Green

Lit when AC power is on and good

10/100Mbps Ethernet TP Port 1 to 8 LED

LNK/ACT/SPD

Green/ Amber

Green Lit when 100Mbps connection with remote device is good

Amber Lit when 10Mbps connection with remote device is good

Blinks when any traffic is present

Off when cable connection is not good

FDX/COL

Amber

(TP Port 1 to 8 LED)

Lit when full-duplex mode is active

Blinks when any collision is present

10/100/1000Mbps Gigabit TP/Fiber Port 9, 10 LED

LNK/ACT/SPD

Green/ Amber

Green Lit when 1000Mbps connection with remote device is good

Amber Lit when 100/10Mbps connection with remote device is good

Blinks when any traffic is present

Off when cable connection is not good

SFP LNK

Green

Lit when Fiber port is active

Off when TP port is active

Network Interface

 

Category

Connector

Transmission

Max. Cable
Length

Wavelength

10-T/100-TX

RJ-45

Full/Half
Duplex

100M

/

1000-T

RJ-45

Full Duplex

100M

/

1000-SX
(M-M)

LC

Full Duplex

220M
50/125µm

850nm

1000-LX
(S-M)

LC

Full Duplex

10KM
9/125µm

1310nm

Full Forwarding Packet Rate: PPS (64 Bytes packets per second)

 

Forwarding Rate

Speed

14,880PPS

10Mbps

148,800PPS

100Mbps

1,488,000PPS

1000Mbps

Cable and Maximum Length

 

Feature

Detailed Description

TP

Cat. 5 UTP cable, up to 100m

1000Base-SX LC M-M

Up to 220/275/500/550m, 
which depends on Multi-Mode Fiber type

1000Base-LX LC S-M

Single-Mode Fiber, up to 10/30/50Km

1000Base-LX WDM LC S-M

Single Fiber, BiDi 10Km

Hardware Spec

 

Feature

Detailed Description

Power Characteristics

Voltage :100~240 VAC

Frequency : 50~60 Hz

Consumption : 11.6W

Ambient Temperature

0° to 40°C

Humidity   

5% to 90%

Dimensions

44(H) ´ 220(W) ´ 130.5(D) mm

EMI

Comply with FCC Part 15 Class A & CE Mark Approval

Ordering Information
 

 

FZ-ES-2310C

8-Port L2 Managed Fast Ethernet Switch + 2 TP/SFP Gigabit Dual Media

Optional SFP Fiber Module (See note below)

 

Model

Description

SFP.LC

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 850nm

SFP.LC.M2

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 1310nm 2km

SFP.LC.S10

1000Base-LX GE SFP Fiber Module, LC Single-Mode 10km

SFP.LC.S30

1000Base-LX GE SFP Fiber Module, LC Single-Mode 30km

SFP.L5.S50

1000Base-LX GE SFP Fiber Module, LC Single-Mode 50km

SFP.BL3.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1310nm

SFP.BL5.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1550nm

SFP.BL3.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1310nm

SFP.BL5.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1550nm

Note:

We recommend the SFP transceiver from the following vendors:

1. Fiberzone Pte Ltd

2.Agilient Technologies

3. Avago Technologies

4. Finisar Corporation

FZ-ES-2126C & FZ-ES-2126CD & FZ-ES-2126D – 24-Port L2 Managed Fast Ethernet Switch + 2 TP/SFP or TP/GBIC Gigabit Dual Media

Description
FZ-ES-2126C/D/CD is a Managed Fast Ethernet switch(FZ-ES-2126CD with VDC power input, range: 36V~72V, typical using 48VDC) that supports SNMP, Web UI and CLI management interface and with 24 10/100Base-TX (RJ-45 connectors) and 2 Gigabit dual media (RJ-45/SFP or RJ-45/GBIC) ports. It is a standard switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. In addition, the switch implements the QoS (Quality of Service), VLAN, MAC Filtering Policy, Port Mirror, VLAN and full L2 protocols. It has a rich feature set suitable for streaming VoIP, video, and data traffics for multimedia applications.
In this switch, Port 25, 26 support two types of media — TP and SFP/GBIC Fiber (LC, BiDi-SC…); both ports support 10/100/1000Mbps TP or 1000Mbps SFP/GBIC Fiber with auto-detected function. 1000Mbps SFP/GBIC Fiber transceiver is used for high-speed connection expansion.

 
Key features

  • Q-i-Q VLAfor performance & security
  • Mac-based 802.ad LACP with automatic link fail-over
  • 2 dual media ports for flexible fiber connection
  • Port Mirroring helps supervisor monitoring network
  • UnknowUnicast/Broadcast/Multicast storm control

 
Technical Specification

  • Standard compliance               
    • IEEE 802.3 10Base-T Ethernet (Twisted-pair Copper)
    • IEEE 802.3100Base-TX Ethernet (Twisted-pair Copper)
    • IEEE 802.3ab 1000Base-TX Ethernet (Twisted-pair Copper)
    • IEEE 802.3z 1000Base-X Ethernet
    • IEEE 802.3x Flow Control Capability
    • ANSI/IEEE 802.3 Auto-negotiation
    • IEEE 802.1q VLAN
    • IEEE 802.1p Class of Service
    • IEEE 802.1x Access Control
    • IEEE 802.1d Spanning Tree
    • IEEE 802.1w Rapid Spanning Tree
    • IEEE 802.3ad Link AggregatioControl Protocol (LACP)
      RoHS Compliance
  • Subscriber Interface
    • 24 are 10/100Mbps + 2 Gigabit Ethernet ports.
    • Port 25,26 are Gigabit TP/SFP Fiber auto sense
    • Auto-Negotiatioand Auto-MDI/MDIX
    • Backpressure flow control for half duplex.
    • 802.3x flow control for full duplex.
    • Connector: 24 RJ-45 and 2 dual media, RJ-45/SFP
  • Performance
    • Switching capacity
      • No-blocking switch fabric supports up to 24FE+2GbE ports
      • 8 K MAC addresses
      • 256k packet buffer and 128k control memory
      • The maximum throughput is 8.8Gbps
      • With 64 bytes packets throughput is 6.547Mpps
      • Provides the wire speed forwarding rate 
    • VSM(Virtual Stacking Management)
      • Up to 16 switches cabe managed via Single IP limited to any specific FiberZone models.
      • Virtual stacking, no extra stacking hardware is required
      • Distributed stacking, no physical central wiring closet is needed
    • VLA
      • Supports SVL/IVL configuratioto meet your VLArequirement
      • Port-base VLAN
      • IEEE802.1q tag-base VLA, 4094 max, up to 4k active VLANs including static plus dynamic entry
      • IEEE802.1q tag-base VLAN
      • Flooding unknowvlaframe setting, caflood packet with some vlatag associated to a invalid/inactive vlan
      • Itag-base VLA, supports egress/ingress packet filter
      • Q-i-Q is aefficient method for enabling Subscriber Aggregation
    • QoS
      • Port Based (VIP Port), 802.1p , TOS and Diffserv(IPv4/IPv6) based QoS packet classification
      • Supports four level priority queues to prioritize i-bound and out-bound traffic
      • Supports two scheduling, WRR and Strict
      • Supports priority ia Q-i-Q tag
    • Broadcast Storm
      • Multicast/Broadcast/Unknow-Unicast Storm suppressio.
    • Port Mirroring
      • Support 1: RX port mirroring
      • Supports port sniffer functiowith 3 modes:
      • (TX Monitor Mode, RX Monitor Mode and TX-RX pair Monitor Mode)
    • Isolated Group
      • Provide one group allows certaiports to be designated as protected
    • Restricted Group
      • Cadecide the directioof transmitting packets for the specific port
    • Rate Limit
      • Ingress rate limit:
        • Port 1~24: 66K up to 100Mbps
        • Port 25, 26: 66K up to 1000Mbps
      • Egress rate limit:
        • Port 1~24: 66K up to 100Mbps
        • Port 25, 26: 66K up to 1000Mbps
  • Protocol
  • LACP
    • 2 Fast Ethernet +1 Gigabit Ethernet groups
    • Per-group max 4 member
    • Provides DA, SA and DA+SA Mac-based trunking with automatic link fail-over
  • GVRP/GARP
    • 802.1q with GVRP/ GARP
  • Multicasting
    • Supports IGMP snooping including active and passive mode
  • STP/RSTP
    • 802.1d/1w
  • Network Security
    • 802.1x access control
    • Isolated group
    • Restricted group
    • Management Access Policy Control
    • Static MAC to limit which MAC addresses capass through or not
    • MAC addresses learning limit, to set up the maximum amount of MAC that each port calearn

Snmpv1,v2c Network Management

¦RFC 1213 MIB (MIB-II)

¦RFC 1757 RMOMIB

   ¦Interface MIB

   ¦Statistics Group 1

   ¦Address TranslatioMIB

   ¦History Group 2

   ¦IP MIB

   ¦Alarm Group 3

   ¦ICMP MIB

   ¦Event Group 9

   ¦TCP MIB

¦RFC 1493 Bridge MIB

   ¦UDP MIB

¦RFC 1643 Ethernet MIB

   ¦SNMP MIB

¦Enterprise MIB

 

LED Description

 

LED

Color

Function

Global

POWER

Green

Lit whe+5V power is coming up

Global

CPACT

Green

Blinks wheCPis active

Port 1-24

LINK/ACT

Green

Lit wheconnectiowith remote device is good

Blinks wheany traffic is present

Port 1-24

100/10Mbps

Gree/Amber

Lit GreewheTP link o100Mbps speed

Lit Amber wheTP link o10Mbps speed

Off whe10Mbps or no link occur

Port 25,26

SFP/GBIC

Gree

Lit wheSFP/GBIC connectiowith remote device is good

Blinks wheany traffic is present

 

Hardware Spec.

      Feature

Detailed Description

Power Characteristics                                               

Voltage:100-240 VAC (FZ-ES-2126C/FZ-ES-2126D)

Voltage: 36-72 VDC, Typical 48VDC(FZ-ES-2126CD)

Frequency: 50~60 Hz

Power Supply: 25W

Ambient Temperature

0° to 40°C

Humidity   

5% to 90%

Dimensions

44(H) ´ 442(W) ´209(D) mm

Weight

FZ-ES-2126C/D

2.85kg

FZ-ES-2126CD

3.0 kg

EMI

Comply with FCC Part 15 Class A & CE Mark Approval

Packing Information

CartoDimensions (mm)

pcs/Carton

.W (KG)

G.W (KG)

530x512x345

5

19

20

 

 

Ordering Information

 

FZ-ES-2126C

24-Port L2 Managed Fast Ethernet Switch + 2 TP/SFP Gigabit Dual Media Ports

FZ-ES-2126CD

24-Port L2 Managed Fast Ethernet Switch + 2 TP/SFP Gigabit Dual Media (36-72V DC)

FZ-ES-2126D

24-Port L2 Managed Fast Ethernet Switch + 2 TP/GBIC Gigabit Dual Media Ports

 

 

 

Optional SFP Fiber Module

SFP.LC

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 850nm

SFP.LC.M2

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 1310nm 2km

SFP.LC.S10

1000Base-LX GE SFP Fiber Module, LC Single-Mode 10km

SFP.LC.S30

1000Base-LX GE SFP Fiber Module, LC Single-Mode 30km

SFP.L5.S50

1000Base-LX GE SFP Fiber Module, LC Single-Mode 50km

SFP.BL3.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1310nm

SFP.BL5.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1550nm

SFP.BL3.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1310nm

SFP.BL5.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1550nm

Optional GBIC Fiber Module

GBIC.SC

1000Base-SX GE GBIC Fiber Module, SC Multi-Mode

GBIC.SC.S10

1000Base-LX GE GBIC Fiber Module, SC Single-Mode 10km

GBIC.SC.S30

1000Base-LX GE GBIC Fiber Module, SC Single-Mode 30km

GBIC.SC.S50

1000Base-LX GE GBIC Fiber Module, SC Single-Mode 50km

GBIC.BS3.S10

1000Base-LX GE GBIC Fiber Module, Bidi SC Single-Mode 10km, 1310nm

GBIC.BS5.S10

1000Base-LX GE GBIC Fiber Module, Bidi SC Single-Mode 10km, 1550nm

GBIC.BS3.S20

1000Base-LX GE GBIC Fiber Module, Bidi SC Single-Mode 20km, 1310nm

GBIC.BS5.S20

1000Base-LX GE GBIC Fiber Module, Bidi SC Single-Mode 20km, 1550nm

 

Note:

We recommend the SFP/GBIC transceiver from the following vendors:

1.          Fiberzone Pte Ltd

2.          Agilient Technologies

3.          AVAGO Technologies

4.          Finisar Corporation

FZ-ES-2310Q – 10-Port L2 Managed Fast Ethernet Switch with 2 100Base-FX Ports

Description
FZ-ES-2310Q is a Managed Fast Ethernet switch that supports SNMP, Web UI and CLI management interface and with 8 ports 10/100Base-TX (RJ-45 connectors) and 2 ports 100Base-FX (SEP). It is a standard switch that meets all IEEE 802.3/u/x Fast Ethernet specifications. In addition, the switch implements the QoS (Quality of Service), VLAN, Mac Filtering Policy, Port Mirror, VLAN and full L2 protocols. It has a rich feature set suitable for streaming VoIP, video, and data traffics for multimedia applications.
In this switch, Port 9, 10 support 2-port 100Base-FX (SEP) , the 2-port fiber is used 2 slots for removable SEP module supporting, they are 100Base-FX fiber module.

 
Key Features

  • QoS with four priority queues
    • The QoS(Quality Of Service) feature provides four internal queues to support four different classifications of traffic. High priority packet streams experience less delay inside the switch, which supports lower latency for certain delay-sensitive traffic. The FZ-ES-2310Q can classify the packet as one of the four priorities according to vip port, 802.1p priority tag, DiffServ and/or IP TOS. The QoS operates at full wire speed. The actual scheduling at each egress port can be based upon a strict priority, weighted round robin or a mix of both.
  • Port Mirroring

    • This mechanism helps track network errors or abnormal packet transmission without interrupting the flow of data. Allow ingress traffic to be monitored by a single port that is defined as mirror capture port. The mirror capture port can be any 10/100 port. Mirroring multiple ports is possible but can create congestion at the mirror capture port.
  • Q-in-Q VLAN for performance & security
    • The VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance. Q-in-Q, the use of double VLAN tags is an efficient method for enabling Subscriber Aggregation. This is very useful in the MAN.
  • Isolated Group, provides protection for certain ports
    • The isolated group feature allows certain ports to be designated as protected. All other ports are non-isolated. Traffic between isolated group members is blocked. Traffic can only be sent from isolated group to non-isolated group.
  • Mac-based 802.ad LACP with automatic link fail-over
    • Dynamic fail-over means packets will not get assigned to any trunk member port that has failed. If one of the ports were to fail, traffic will automatically get distributed to the remaining active ports.
  • 802.1x Access Control improves network security

    • 802.1x features enable user authentication for each network access attempt. Port security features allow you to limit the number of MAC addresses per port in order to control the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the number of access stations.

     

  • 802.1d Compatible & 802.1w Rapid Spanning Tree
    • For mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in event of any fail-over switch on the network.

     

  • 2 slots for flexible fiber connection
    • Port 9, 10 slots are provided for flexible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or long distance fiber backbone attachment. Use of the SEP 100Base-FX connections.

     

  • Broadcast/Multicast/unknown-unicast Storm Control
    • To limit too many broadcast/multicast/unknown-unicast flooding in the network, broadcast/multicast storm control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured upper thresho

 
Technical Specification

  • Standard compliance              
    •     IEEE 802.3 10Base-T (twisted-pair copper)
    •     IEEE 802.3u 100Base-TX (twisted-pair copper)
    •      IEEE 802.3x Flow Control Capability
    •     ANSI/IEEE 802.3 Auto-negotiation
    •     IEEE 802.1q VLAN
  • Subscriber Interface
    •     1-8 10/100Mbps Fast Ethernet ports.
    •     9,10 are Fast Ethernet Fiber ports with SEP module
    •     Auto-Negotiation and Auto-MDIX
    •     Back pressure flow control for half duplex.
    •     IEEE 802.3x flow control for full duplex
    •     Connector: 8 ports RJ-45 and 2 ports Fiber (SEP)
  • Performance
    • Switching capacity:
      •     Non-blocking switch fabric supports up to 8 FE+2 SEP ports
      •      8 K MAC addresses
      •     256K packet buffer and 128K control memory
      •     The maximum throughput is 2Gbps
      •     With 64 bytes packets throughput is 1.488Mpps
    • VSM(Virtual Stacking Management)
      •     Up to 16 switches can be managed via Single IP limited to any specific FiberZone models.
      •     Virtual stacking, no extra stacking hardware is required
      •     Distributed stacking, no physical central wiring closet is needed
    • VLAN
      •     Supports SVL/IVL configuration to meet your VLAN requirement
      •     Port-base VLAN
      •     IEEE802.1q tag-base VLAN, 4094 max, up to 256 active VLANs including static plus dynamic entry
      •     IEEE802.1q tag-base VLAN
      •     Flooding unknown VLAN frame setting, can flood packet with some VLAN tag associated to a invalid/inactive VLAN
      •      In tag-base VLAN, supports egress/ingress packet filter
      •     Q-in-Q is an efficient method for enabling Subscriber Aggregation
    • QoS
      •       Port Based (VIP Port), 802.1p , TOS and Diffserv(IPv4) based QoS packet classification
      •     Supports four level priority queues to prioritize in-bound and out-bound traffic
      •      Supports two scheduling, WRR and Strict
    • Broadcast Storm
      •      Multicast/Broadcast/Unknown-Unicast Storm suppression.
    • Transmission Mode
      •     10/100Mbps support full or half duplex
    • Transmission Speed
      •     10/100Mbps for TP and 100Mbps for Fiber
    • Port Mirroring
      •     Support 1: N RX port mirroring
      •     Supports port sniffer function with 3 modes:
      • (TX Monitor Mode, RX Monitor Mode and TX-RX pair Monitor Mode)
    • Isolated Group
      •    Provide one group allows certain ports to be designated as protected
    • Restricted Group
      •    Can decide the direction of transmitting packets for the specific por
  • Protocol
    • LACP
      •    2 Fast Ethernet groups
      •    Per-group max 4 member
      •    Provides DA, SA and DA+SA Mac-based trunking with automatic link fail-over
    • GVRP/GARP
      •    802.1q with GVRP/ GARP
    • Multicasting
      •    Supports IGMP snooping including active and passive mode
    • STP/RSTP
      •    802.1d/1w
  • Network Security
    •     802.1x access control
    •    Isolated group
    •    Management Access Policy Control
    •    Static MAC, to limit which MAC addresses can pass through or not
    •    MAC addresses learning limit, to set up the maximum amount of MAC that each port can learn

Snmpv1,v2c Network Management

RFC 1213 MIB (MIB-II)

RFC 1757 RMON MIB

   Interface MIB

   Statistics Group 1

   Address Translation MIB

   History Group 2

   IP MIB

   Alarm Group 3

   ICMP MIB

   Event Group 9

   TCP MIB

RFC 1493 Bridge MIB

   UDP MIB

RFC 1643 Ethernet MIB

   SNMP MIB

Enterprise MIB

 

LED Description

 

LED

Color

                Function

System LED

CPURUN

Green

Lit when CPU is on and good

POWER

Green

Lit when AC power is on and good

10/100Mbps Ethernet TP Port 1 to 8 LED

LNK/ACT/SPD

Green/ Amber

Green Lit when 100Mbps connection with remote device is good

Amber Lit when 10Mbps connection with remote device is good

Blinks when any traffic is present

Off when cable connection is not good

FDX/COL

Amber

(TP Port 1 to 8 LED)

Lit when full-duplex mode is active

Blinks when any collision is present

 

100Mbps Fiber Port 9, 10 LED

LNK/ACT

Green

Green Lit when 100Mbps connection with remote device is good

Blinks when any traffic is present

Off when cable connection is not good

 
Network Interface

 

Category

Connector

Transmission

Max. Cable
Length

Wavelength

10-T/100-TX

RJ-45

Full/Half
Duplex

100M

/

100-FX (M-M)

SC/ST

Full/Half
Duplex

2Km
50/125µm

1310nm

100-FX (S-M)

SC

Full/Half
Duplex

5/20/60Km
9/125µm

1310nm

100-FX (S-M)

Bidi-SC

Full/Half
Duplex

20Km
9/125µm

1310nm

1550nm

 

Full Forwarding Packet Rate: PPS (64 Bytes packets per second)

 

Forwarding Rate

Speed

14,880PPS

10Mbps

148,800PPS

100Mbps

 

Cable and Maximum Length

 

Feature

Detailed Description

TP

Cat. 5 UTP cable, up to 100m

100Base-FX SC/ST M-M

Up to 2Km

100Base-FX SC S-M

Single-Mode Fiber, up to 5/20/60Km

100Base-FX WDM SC S-M

Single Fiber, BiDi 20Km

 

Hardware Spec

 

             Feature

Detailed Description

Power Characteristics

Voltage:100~240 VAC

Frequency :50~60 Hz

Consumption :8.9W

Ambient Temperature

0° to 40°C

Humidity

5% to 90%

Dimensions

44(H) ´ 220(W) ´ 130.5(D) mm

EMI

Comply with FCC Part 15 Class A & CE Mark Approval

 

Ordering Information

 

FZ-ES-2310Q

8-Port L2 Managed Fast Ethernet Switch + 2 100Base-FX Module

 

Optional SEP Fiber Module

 

Model

Description

FM-SEP.SC

100Base-FX FE SEP Fiber Module, SC Multi-Mode

FM-SEP.ST

100Base-FX FE SEP Fiber Module, ST Multi-Mode

FM-SEP.SC.S05

100Base-FX FE SEP Fiber Module, SC Single-Mode 5km

FM-SEP.SC.S20

100Base-FX FE SEP Fiber Module, SC Single-Mode 20km

FM-SEP.SC.S40

100Base-FX FE SEP Fiber Module, SC Single-Mode 40km

FM-SEP.SC.S60

100Base-FX FE SEP Fiber Module, SC Single-Mode 60km

FM-SEP.BS3.S20

100Base-FX FE SEP Fiber Module, Bidi SC Single-Mode 20km, 1310nm

FM-SEP.BS5.S20

100Base-FX FE SEP Fiber Module, Bidi SC Single-Mode 20km, 1550nm

FZ-ES-2226C & FZ-ES-2226CD – 24-Port L2 Plus Managed Fast Ethernet Switch + 2 TP/SFP Gigabit Dual Media

Description
FZ-ES-2226C/CD, 24 Fast Ethernet + 2 Gigabit L2 Managed Switch, implemented 24 10/100Mbps TP + 2 Gigabit dual media ports with TP/SFP(or GBIC), is a standard switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet and Ethernet specifications. The switch can be managed through RS-232 serial port via direct connection, or through Ethernet port using Telnet or Web-based management unit, associated with SNMP agent. With the SNMP agent, the network administrator can logon the switch to monitor, configure and control each port activity in a friendly way. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications. In addition, the switch features comprehensive and useful function such as DHCP Option 82, QoS (Quality of Service), Spanning Tree, VLAN, Port Trunking, Bandwidth Control, Port Security, SNMP/RMON and IGMPv3 Snooping capability via the intelligent software. It is suitable for both Metro-LAN and office application.Others the switch increase support the Power saving for reduce the power consumption with Power Management technique. It could efficient saving the switch power with auto detect the client idle and cable length to provide different power. The serial products have two kinds model with FZ-ES-2226C (AC Power Input) and FZ-ES-2226CD (DC Power Input)

 
Key features

  • 2 Dual Media for Flexible Fiber Connection
  • Port Mirroring helps supervisor monitoring network
  • Support Q-in-Q(Double-tag)
  • IEEE802.1Q tag-base VLAN for performance & security and 4094 
    VLAN entries
  • IEEE802.1X Access Control improve network security
  • IEEE802.1D Compatible, IEEE802.1w Rapid Spanning Tree & 
    IEEE802.1s Multiple Spanning Tree
  • Unknown Unicast/Broadcast/Multicast storm control
  • Multicast VLAN management for IPTV
  • IP-MAC-Port binding for LAN security
  • QCL Based on Application traffic for QoS and rate limitation 
    managmenet
  • Support IGMPv3 snooping and IGMP Proxy
  • Support DHCP snooping (DHCP option 82)
  • ACL Based on Ethernet Type/ARP/IPv4 for packets permit or deny,
    rate limitation and port copy
  • SSL/SSH/TACACS+/RADIUS (Optional for project requirement)for 
    security network managment
  • Support "power saving" for Green Ethernet requirement
  • Support LLDP(Link Layer Discovery Protocol) provides a standards-
    based method for enabling awitches to advertise themselves.
  • DC Power 48 VDC (36~72VDC) add DC power through the removable 
    terminal block from external DC power source installation
    (FZ-ES-2226CD only)

 
Technical Specification

  • Standard compliance

    • IEEE 802.3 10Base-T Ethernet (Twisted-pair Copper)
    • IEEE 802.3u 100Base-TX Ethernet (Twisted-pair Copper)
    • IEEE 802.3ab 1000Base-TX Ethernet (Twisted-pair Copper)
    • IEEE 802.3z 1000Base-X Ethernet
    • IEEE 802.3x Flow Control Capability
    • IEEE 802.1Q VLAN
    • ANSI/IEEE 802.3 Auto-negotiation
    • IEEE 802.1p Class of Service
    • IEEE 802.1X Access Control
    • IEEE 802.1D Spanning Tree
    • IEEE 802.1w Rapid Spanning Tree
    • IEEE 802.1s Multiple Spanning Tree
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
  • RoHS Compliance
  • Power Saving for green ethernet Requirement
  • LLDP (IEEE802.1AB) automated device discovery protocol for
      easy mapping by network management applications
  • Performance
    • Switching capacity 
      • 8 K MAC addresses
      • Supports Throughput: 8.8Gbps
      • Unknown Unicast/Broadcast/Multicast Storm Suppression
      • Port Mirroring
      • With 64 bytes packets throughput is 6.547Mpps
    • Rate Limit
      •   Ingress rate limit:
        • Port 1~24: 64K up to 100Mbps
        • Port 25, 26: 64K up to 1000Mbps
      •   Egress rate limit:
        • Port 1~24: 64K up to 100Mbps
        • Port 25, 26: 64K up to 1000Mbps
    • Subscriber Interface
      • 24 ports are 10/100Mbps and 2 Gigabit Ethernet ports with non-
        blocking wise speed performance.
      • Port 25,26 are Gigabit TP/SFP Fiber auto sense
      • Auto-negotiation and Auto-MDIX
      • Backpressure flow control for half duplex.
      • 802.3x flow control for full duplex.
      • Connector: 24 RJ-45 and 2 dual media, RJ-45/SFP
    • VLAN
      • Supports SVL/IVL configuration to meet your VLAN requirement
      • Port-base VLAN
      • IEEE802.1Q tag-base VLAN, 4094 max, up to 4k active VLANs 
        including static plus dynamic entry
      • Flooding unknown VLAN frame setting, can flood packet with some
        VLAN tag associated to an invalid/inactive VLAN
      • In tag-base VLAN, supports egress/ingress packet filter
      • Supports Multicast VLAN Registration (MVR) carrier to serve 
        content provider using multicast for Video streaming application in 
        the network
      • Q-in-Q is an efficient method for enabling Subscriber Aggregation
    • QoS
      • Port Based, 802.1p and Diffserv (IPv4) QoS packet classification
      • Supports QCL for Layer 4 TCP/UDP Port and ToS Classification
      • Supports two scheduling, WRR and Strict
    • Bandwidth Control
      • Supports bandwidth rating per port ingress and egress rate limit 
        500Kbps~1000Mbps with 1Kbps
  • Protocol
    •   LACP
      • 12 groups
      • Per-group max 8 member
      • Provides DA, SA and DA+SA Mac-based trunking with automatic link
        fail-over
    •   GVRP/GARP
      • 802.1Q with GVRP Multicasting
      • Supports IGMPv3 Snooping including active and passive mode
    •   STP/RSTP/MSTP
      • 802.1d/1w/1s
    •   Port Mirroring
      • Support 1: N RX port mirroring
      • Supports port sniffer function with 3 modes:
        (TX Monitor Mode, RX Monitor Mode and TX-RX pair Monitor Mode)
  • Network Security
    • 802.1x access control
    • Isolated group allows certain ports to be designated as protected
    • Management Access Policy Control
    • Static MAC, to limit which MAC addresses can pass through or not
    • MAC addresses learning limit, to set up the maximum amount of 
      MAC that each port can learn
    • Access Control List
    • IP-MAC-Port binding
    • DHCP snooping (Includes DHCP option 82)
    • SSL/ SSH for management (Optional by Project Requirement)
    • TACACS+ for management authentication (Optional by Project 
      Requirement)
  • VSM (Virtual Stacking Management)
    • Supports 16 devices stacking
    • Multiple switches can be managed via one IP address, just like 
      software stacking
    • Low cost and easy to establish network environment, no extra 
      hardware required
    •   Not center on the physical location of wiring closets

SNMPv1, v2c Network Management

 RFC 1213 MIB (MIB-II)

 RFC 1757 RMON MIB

   —Interface MIB

   —Statistics Group 1

     —Address Translation MIB

   —History Group 2

   —IP MIB

   —Alarm Group 3

   —ICMP MIB

   —Event Group 9

   —TCP MIB

RFC 1493 Bridge MIB

   —UDP MIB

RFC 1643 Ethernet MIB

   —SNMP MIB

Enterprise MIB

 IEEE 802.1q VLAN MIB

IEEE 802.1p QoS MIB

*SNMP v3 (Optional by Project Requirement)

LED Description 

LED

Color

                Function

System LED

CPURUN

Green

Lit when CPU is on and good

POWER

Green

Lit when AC power is on and good

ACT

Green

Lit when LEDSET set on active mode

FDX

Green

Lit when LEDSET set on full-duplex mode

SPD

Green

Lit when LEDSET set on speed mode

10/100Mbps Ethernet TP Port 1 to 24 LED

LNK

Green

—Lit when connection with remote 
   
device is good

—Off when cable connection is not 
   
good

ACT/FDX/ SPD

Amber

(TP Port 1 to 24 LED)

a.  LEDSET set on ACT (active)
    
mode:

    Blinks when any traffic is present

b.  LEDSET set on FDX (full-duplex) 
    
mode:

     —Lit when full-duplex mode is 
        
active

     —Blinks when any collision is 
         
present

c.     LEDSET set on SPD (speed) mode:

—Lit when 100Mbps speed is 
       
active

—Off when 10Mbps speed is 
       
active

10/100/1000Mbps Gigabit TP/Fiber Port 25, 26 LED

LNK

Green

—Lit when connection with remote 
   
device is good

—Off when cable connection is not 
   
good

FB

Green

Lit when Fiber port is active

Off when TP port is active

 ACT/FDX/ SPD

Green

(Port 25, 

26 LED)

 

a.     LEDSET set on ACT (active) mode:

Blinks when any traffic is present

b.     LEDSET set on FDX (full-duplex) mode:

—Lit when full-duplex mode is 
       
active

—Blinks when any collision is 
       
present

c.     LEDSET set on SPD (speed) mode:

—Lit when 1000Mbps speed is 
       
active

—Off when 10/100Mbps speed is 
       
active

Network Interface

 

 

Connector

Port

10/100Mbps TP Jack (RJ-45)

TP(RJ-45)

1 to 24

1000Mbps SFP Fiber Module Dual Media Auto Detection

SFP

25, 26

 

Hardware Spec

 

Feature

Detailed Description

PowerCharacteristics

Voltage: 100-240VAC (FZ-ES-2226C)

Frequency: 50~60 Hz

Max Power Consumption: 30W

Ambient Temperature

0 to 40 °C

Humidity

5% to 90%

Dimensions

44(H) x 442(W) x 209(D) mm

 

Weight

 

 

FZ-ES-2226CD

 

 

3.0 kg

EMI

Comply with FCC Part 15 Class A and

CE Mark Approval

Packing Information

 

Carton Dimensions (mm)

pcs/Carton

N.W (KG)

G.W (KG)

500x330x118

3

11.4

12.4

 

 

Ordering Information

 

FZ-ES-2226C

24-Port L2 Plus Managed Fast Ethernet Switch + 2 TP/SFP Gigabit Dual Media

FZ-ES-2226CD

24-Port L2 Plus Managed Fast Ethernet Switch + 2 TP/SFP Gigabit Dual Media (36-72V DC)

Optional SFP Module

 

SFP.LC

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 850nm

SFP.LC.M2

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 1310nm 2km

SFP.LC.S10

1000Base-LX GE SFP Fiber Module, LC Single-Mode 10km

SFP.LC.S30

1000Base-LX GE SFP Fiber Module, LC Single-Mode 30km

SFP.L5.S50

1000Base-LX GE SFP Fiber Module, LC Single-Mode 50km

SFP.BL3.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1310nm

SFP.BL5.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1550nm

SFP.BL3.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1310nm

SFP.BL5.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1550nm

Note:

We recommend the SFP transceiver from the following vendors:

1. Fiberzone Pte Ltd

2. Agilient Technologies

3. AVAGO Technologies

4. Finisar Corporation

FZ-ES-2126G – 24-Port L2 Managed Fast Ethernet Switch + 2 TP/(100M/1000M) SFP Dual Media

Description
FZ-ES-2126G is a Managed Fast Ethernet switch that supports SNMP, Web UI and CLI management interface and with 24 10/100Base-TX (RJ-45 connectors) and 2 dual media (RJ-45/SFP and supports 100M/1000M dual speed SFP fiber transceiver) ports. It is a standard switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. In addition, the switch implements the QoS (Quality of Service), VLAN, Mac Filtering Policy, Port Mirror, VLAN and full L2 protocols. It has a rich feature set suitable for streaming VoIP, video, and data traffics for multimedia applications.In this switch, Port 25, 26 support two types of media — TP and SFP Fiber; both ports support 10/100/1000Mbps TP or 100Mbps or 1000Mbps SFP Fiber with auto-detected function. The SFP Fiber transceiver is used for high-speed connection expansion.

 
Key features

  • Q-in-Q VLAN for performance & security
  • Mac-based 802.ad LACP with automatic link fail-over
  • 2 dual media ports for flexible fiber connection
  • Port Mirroring helps supervisor monitoring network
  • Unknown Unicast/Broadcast/Multicast storm control
  •  100M and 1000M dual speed SFP fiber supported

 
Technical Specification

  • Standard compliance               
    • IEEE 802.3 10Base-T Ethernet(twisted-pair copper)
    • IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)
    • IEEE 802.3ab 1000Base-TX Ethernet(twisted-pair copper)
    • IEEE 802.3z 1000Base-X Ethernet
    • IEEE 802.3x flow control capability
    • ANSI/IEEE 802.3 auto-negotiatio
    • IEEE 802.1q VLA
    • IEEE 802.1p Class of Service
    • IEEE 802.1x Access Control
    • IEEE 802.1d Spanning Tree
    • IEEE 802.1w Rapid Spanning Tree
    • IEEE 802.3ad Link AggregatioControl Protocol (LACP)
  • RoHS Compliance
  • Subscriber Interface
    • 24 are 10/100Mbps and 2 Ethernet ports.
    • Port 25,26 are TP/SFP (100M or 1000M) Fiber auto sense
    • Auto-Negotiatioand Auto-MDIX
    • Backpressure flow control for half duplex.
    • 802.3x flow control for full duplex.
    • Connector: 24 RJ-45 and 2 dual media, RJ-45/SFP
  • Performance
    • Switching capacity
      • No-blocking switch fabric supports up to 24FE+2GbE ports
      • 8 K MAC addresses
      • 256k packet buffer and 128k control memory
      • The maximum throughput is 8.8Gbps
      • With 64 bytes packets throughput is 6.547Mpps
    • VSM(Virtual Stacking Management)
      • Up to 16 switches cabe managed via Single IP limited to any specific FiberZone models.
      • Virtual stacking, no extra stacking hardware is required
      • Distributed stacking, no physical central wiring closet is needed
    • VLA
      • Supports SVL/IVL configuratioto meet your VLArequirement
      • Port-base VLA
      • IEEE802.1q tag-base VLA, 4094 max, up to 4k active VLANs including static plus dynamic entry
      • IEEE802.1q tag-base VLA
      • Flooding unknowvlaframe setting, caflood packet with some vlatag associated to a invalid/inactive vla
      • Itag-base VLA, supports egress/ingress packet filter
      • Q-i-Q is aefficient method for enabling Subscriber Aggregatio
    • QoS
      • Port Based (VIP Port), 802.1p , TOS and Diffserv(IPv4/IPv6) based QoS packet classificatio
      • Supports four level priority queues to prioritize i-bound and out-bound traffic
      • Supports two scheduling, WRR and Strict
      • Supports priority ia Q-i-Q tag
    • Broadcast Storm
      • Multicast/Broadcast/Unknow-Unicast Storm suppressio.
    • Port Mirroring
      • Support 1: RX port mirroring
      • Supports port sniffer functiowith 3 modes:
      • (TX Monitor Mode, RX Monitor Mode and TX-RX pair Monitor Mode)
    • Isolated Group
      • Provide one group allows certaiports to be designated as protected
    • Restricted Group
      • Cadecide the directioof transmitting packets for the specific port
    • Rate Limit
      • Ingress rate limit:
        •          Port 1~24: 1K up to 100Mbps
        •          Port 25, 26: 1K up to 1000Mbps
      • Egress rate limit:
        •          Port 1~24: 1K up to 100Mbps
        •          Port 25, 26: 1K up to 1000Mbps
  • Protocol
    • LACP
      • 2 Fast Ethernet +1 Gigabit Ethernet groups
      • Per-group max 4 member
      • Provides DA, SA and DA+SA Mac-based trunking with automatic link fail-over
    • GVRP/GARP
      • 802.1q with GVRP/ GARP
    • Multicasting
      • Supports IGMP snooping including active and passive mode
    • STP/RSTP
      • 802.1d/1w
  • Network Security
    • 802.1x access control
    • Isolated group
    • Restricted group
    • Management Access Policy Control
    • Static MAC, to limit which MAC addresses capass through or not
    • MAC addresses learning limit, to set up the maximum amount of MAC that each port calear

Snmpv1,v2c Network Management

RFC 1213 MIB (MIB-II)

RFC 1757 RMOMIB

 Interface MIB

   Statistics Group 1

Address TranslatioMIB

 History Group 2

IP MIB

 Alarm Group 3

ICMP MIB

 Event Group 9

 TCP MIB

RFC 1493 Bridge MIB

 UDP MIB

RFC 1643 Ethernet MIB

 SNMP MIB

Enterprise MIB

 

LED Description

 

LED

Color

Function

Global

POWER

Green

Lit whepower is coming up

Global

CPU ACT

Green

Blinks wheCPU is active

Port 1-24

LINK/ACT

Green

Lit wheconnectiowith remote device is good

Blinks wheany traffic is present

Port 1-24

100/10Mbps

Gree/Amber

Lit GreewheTP link o100Mbps speed

Lit Amber wheTP link o10Mbps speed

Off whe10Mbps or no link occur

Port 25,26

SFP (100M or 1000M)

Gree

Lit wheSFP connectiowith remote device is good

Blinks wheany traffic is present

Hardware Spec.

Feature

Detailed Description

Power Characteristics                                                  

Voltage:100-240 VAC

Frequency: 50~60 Hz

Power Supply: 25W

Ambient Temperature

0° to 40°C

Humidity   

5% to 90%

Dimensions

44(H) ´ 442(W) ´ 209(D) mm

Weight

2.85kg

EMI

Comply with FCC Part 15 Class A & CE Mark Approval

Packing Informatio

CartonDimensions (mm)

pcs/Carton

.W (KG)

G.W (KG)

530x512x345

5

19

20

Ordering Informatio

FZ-ES-2126G

24-Port L2 Managed Fast Ethernet Switch + 2 TP/(100M/1000M) SFP Gigabit Dual Media

Note:

We recommend the SFP transceiver from the following vendors:

1. Fiberzone Pte Ltd

2. Agilient Technologies

3. AVAGO Technologies

4. Finisar Corporation