PoE Switch

FZ-PSES-2126C & FZ-PSES-2126CF – 24-Port L2 Managed Fast Ethernet PoE Switch + 2 TP/SFP Gigabit Dual Media

Description
FZ-PSES-2126C/CF series PoE Products (includes FZ-PSES-2126C with 185W power supply and FZ-PSES-2126CF with 380W power supply) supports 24 10/100Mbps Auto-negotiation, Auto-MDIX Ethernet ports and Power over Ethernet to IEEE 802.3af compliant devices. With the 24-port featuring PoE function, the FZ-PSES-2126C/CF is an ideal solution for wireless AP, VoIP phones, security video cameras. The FZ-PSES-2126C supports up to 24-Port 7.7 watts and FZ-PSES-2126CF supports up to 24-port 15.4 watts. It’s fully compliant with the standards of IEEE 802.3/u/x/z/ab/af.
It is equipped with 24 UTP (RJ-45) ports and 2 of which are dual media ports that accommodate optional 10/100/1000Base-T or SFP modules. In addition, the switch implements the QoS (Quality of Service), Mac Filtering Policy, Port Mirror, VLAN and full L2 protocol. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications with security.

 

Key Benefits

nPort Mirroring helps supervisor monitoring network
nSupport Q-in-Q(Double-tag)
nIEEE802.1Q tag-base VLAN, 256 active max and port-base VLAN
nIEEE802.1X Access Control improve network security
nIEEE802.1D Compatible, IEEE802.1w Rapid Spanning Tree
nUnknown Unicast/Broadcast/Multicast storm control
n2 Dual Media for Flexible Fiber Connection
nSupport IEEE 802.3af compliant with Endpoint with 48VDC power through RJ-45 pin 1, 2, 3, 6. for PoE Requirement. (FZ-PSES-2126C
provides up to 7.7W/port for 24-port, FZ-PSES-2126CF provides up to 15.4W/port for 24-port)
nSupport IGMP Snooping

 

Benefits

PoE Save Your Power Infrastructure and Installation Cost

24-PoE ports allow power ( 185W for FZ-PSES-2126C or 380W for FZ-PSES-2126CF) to be supplied to end devices, such as Wireless Access Points or VoIP Phones, directly through the existing LAN cables, eliminating costs for additional AC wiring and reducing Installation Cost. It frees your wireless AP deployment from restriction due to power outlet location. By supplying the power end-span, you can centralize power distribution and backup without the need to increase infrastructure.

QoS with Four Priority Queues

The QoS(Quality Of Service) feature provides four internal queues to support four different classifications of traffic. High priority packet streams experience less delay inside the switch, which supports lower latency for certain delay-sensitive traffic. The FZ-PSES-2126C series can classify the packet as one of the four priorities according to vip port, 802.1p priority tag, DiffServ and/or IP TOS. The QoS operates at full wire speed. The actual scheduling at each egress port can be based upon a strict priority, weighted round robin or a mix of both.

IGMP Snooping

The function, IGMP Snooping, is used to establish the multicast groups to forward the multicast packet to the member ports, and, in nature, avoids wasting the bandwidth while IP multicast packets are running over the network. This is because a switch that does not support IGMP or IGMP Snooping can not tell the multicast packet from the broadcast packet, so it can only treat them all as the broadcast packet. Without IGMP Snooping, the multicast packet forwarding function is plain and nothing is different from broadcast packet. IGMP Snooping can send v1/v2 IGMP query together.

Port Mirroring

This mechanism helps track network errors or abnormal packet transmission without interrupting the flow of data. Allow ingress traffic to be monitored by a single port that is defined as mirror capture port. The mirror capture port can be any 10/100 port, 10/100/1000 port. Mirroring multiple ports is possible but can create congestion at the mirror capture port.

Q-in-Q VLAN for performance & security

The VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance. VLAN support enabling advanced techniques such as “802.1Q-in-1Q” to be deployed.

Isolated Group, Provide Secure for Certain Ports

The isolated group feature allows certain ports to be designated as protected. All other ports are non-isolated. Traffic between isolated group members is blocked. Traffic can only be sent from isolated group to non-isolated group.

Mac-based 802.ad LACP with Automatic Link Fail-over

Dynamic fail-over means packets will not get assigned to any trunk member port that has failed. If one of the ports were to fail, traffic will automatically get distributed to the remaining active ports.

802.1X Access Control Improve Network Security

802.1X features enable user authentication for each network access attempt. Port security features allow you to limit the number of MAC addresses per port in order to control the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the number of access stations.

802.1D Compatible & 802.1w Rapid Spanning Tree

For mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in event of any fail-over switch on the network.

2 Dual Media for Flexible Fiber Connection

Dual media port 25 and 26 are provided for flexible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or long distance fiber backbone attachment. Use of the SFP will disable their corresponding built-in 10/100/1000Base-T connections.

Broadcast/Multicast/Unknown-Unicast Storm Control

To limit too many broadcast/multicast/unknown-unicast flooding in the network, broadcast/multicast storm control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured upper threshold.

 
Technical Specifications

nStandard Compliance          

IEEE 802.3 10Base-T Ethernet (Twisted-pair Copper)

IEEE 802.3u 100Base-TX Ethernet (Twisted-pair Copper)

—IEEE 802.3ab 1000Base-TX Ethernet (Twisted-pair Copper)

IEEE 802.3z 1000Base-X Ethernet

—IEEE 802.3x Flow Control Capability

—ANSI/IEEE 802.3 Auto-negotiation

IEEE 802.1Q VLAN

—IEEE 802.1p Class of Service

IEEE 802.1X Access Control

—IEEE 802.1D Spanning Tree

IEEE 802.1w Rapid Spanning Tree

IEEE 802.3af Power over Ethernet

—IEEE 802.3ad Link Aggregation Control Protocol (LACP)

nRoHS Compliance

nSubscriber Interface

Port 1-24 are 10/100Mbps Fast Ethernet ports.

Port 25,26 are Gigabit TP/SFP Fiber auto sense

Auto-Negotiation and Auto-MDIX

Backpressure flow control for half duplex.

—802.3x flow control for full duplex.

—Connector: 24 RJ-45 and 2 dual media, RJ-45/SFP

n      Performance

      Switching capacity:

Switch Capacity: 8.8Gbps

Throughput: 6.547Mpps

Non-blocking switch fabric supports up to 24FE+2GbE ports

8 K MAC addresses

256k packet buffer and 128k control memory

nVSM (Virtual Stacking Management):

Up to 16 switches can be managed via Single IP limited to any specific Fiberzone models.

Virtual stacking, no extra stacking hardware is required

Distributed stacking, no physical central wiring closet is needed

nVLAN

Supports SVL/IVL configuration to meet your VLAN requirement

Port-base VLAN

IEEE802.1Q tag-base VLAN, 4094 max, up to 256 active VLANs included static plus dynamic entry

—IEEE802.1q tag-base VLAN

Flooding unknown VLAN frame setting, can flood packet with some VLAN tag associated to a invalid/inactive vlan VLAN

In tag-base VLAN, supports egress/ingress packet filter

Q-in-Q is an efficient method for enabling Subscriber Aggregation.

nQoS

Port Based (VIP Port), 802.1p , TOS and Diffserv(IPv4) based QoS packet classification

Supports four level priority queues to prioritize in-bound and out-bound traffic

Supports two scheduling, WRR and Strict

nBroadcast Storm

Multicast/Broadcast/Unknown-Unicast Storm suppression.

nPort Mirroring

Support 1: N RX port mirroring.

—Supports port sniffer function with 3 modes:

      (TX Monitor Mode, RX Monitor Mode and TX-RX pair Monitor Mode).

nIsolated Group

Provide one group allows certain ports to be designated as protected.

nRate Limit

Ingress rate limit:

Port 1~24: 66K up to 100Mbps

Port 25, 26: 66K up to 1000Mbps

Egress rate limit:

Port 1~24: 66K up to 100Mbps

Port 25, 26: 66K up to 1000Mbps     

nPoE Specification

24 IEEE802.3af PoE PSE ports

—Endpoint with 48VDC power through RJ-45 pin 1, 2, 3, 6.

PoE-PSE activity LED indicator.

185 watts of FZ-PSES-2126C and 380 watts of FZ-PSES-2126CF of total power (FZ-PSES-2126C supports up to 7.7 watts for 24 ports and FZ-PSES-2126CF supports up to 15.4 watts for 24 ports )

Auto detect powered device and consumption levels

Supports per port power consumption monitoring

Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority

Circuit protection to prevent power interference between ports

Supports per port PoE State setting

—Supports per port power priority setting

nProtocol

LACP

2 Fast Ethernet +1 Gigabit Ethernet groups

Per-group max 4 members

Provides DA, SA and DA+SA Mac-based trunking with automatic link fail-over

GVRP/GARP

802.1Q with GVRP/ GARP

Multicasting

Supports IGMP snooping including active and passive mode

STP/RSTP

802.1D/1w

Network Security

802.1X access control

Isolated groupn   

nSNMPv1,v2c Network Management

nRFC 1213 MIB (MIB-II)      nRFC 1757 RMON MIB

     nInterface MIB                 nStatistics Group 1

     nAddress Translation MIB   nHistory Group 2

     nIP MIB                          nAlarm Group 3

     nICMP MIB                      nEvent Group 9

     nTCP MIB                          nRFC 1493 Bridge MIB

     nUDP MIB                          nRFC 1643 Ethernet MIB

     nSNMP MIB                        nEnterprise MIB

nLED Description

LED

Color

Function

System LED

CPURUN

Green

Blinks when CPU is on and good

POWER

Green

Lit when AC power is on and good

ACT

Green

Lit when LEDSET set on active mode

FDX

Green

Lit when LEDSET set on full-duplex mode

SPD

Green

Lit when LEDSET set on speed mode

10/100Mbps Ethernet TP Port 1 to 24 LED

LNK

Green

Lit when connection with remote device is good

Off when cable connection is not good

ACT/FDX/ SPD

Amber

(TP Port 1 to 24 LED)

a. LEDSET set on ACT (active) mode:

Blinks when any traffic is present

b. LEDSET set on FDX (full-duplex) mode:

Lit when full-duplex mode is active

Blinks when any collision is present

c. LEDSET set on SPD (speed) mode:

Lit when 100Mbps speed is active

Off when 10Mbps speed is active

10/100/1000Mbps Gigabit TP/Fiber Port 25, 26 LED

    LNK

Green

Lit when connection with remote device is good

Off when cable connection is not good

    FX

Green

Lit when Fiber port is active

Off when TP port is active

ACT/FDX/ SPD

Green

(Port 25, 26 LED)

a. LEDSET set on ACT (active) mode:

Blinks when any traffic is present

b. LEDSET set on FDX (full-duplex) mode:

Lit when full-duplex mode is active

Blinks when any collision is present

c. LEDSET set on SPD (speed) mode:

Lit when 1000Mbps speed is active

Off when 10/100Mbps speed is active

PoE Port Status Indication LEDs

PoE-PSE ACT

Green

Lit when PoE Power is active

 

nCable and Maximum Length

 

Feature

 

TP

Cat. 5 UTP cable, up to 100m

1000Base-SX LC M-M

Up to 220/275/500/550m, 
which depends on Multi-Mode Fiber type

1000Base-LX LC S-M

Single-Mode Fiber, up to10/30/50Km

1000Base-LX WDM LC S-M

Single-Mode Single Fiber, Bidi 20Km

 

nHardware Spec

 

             Feature

Detailed Description

Power Characteristics

 

Voltage : 100~240 V

Frequency : 50~60 Hz

PoE Power:

Max. 15W ( in case no PD device  connected)

Max. 185W ( with 12 x 15.4W PD device connected ) –PSES-2126C

Max. 380W ( with 24 x 15.4W PD device connected ) –PSES-2126CF

Ambient Temperature

0 to 40°C

Humidity

5% to 90%

Dimensions

FZ-PSES-2126C  : 44(H) x 442(W) x 209(D) mm

FZ-PSES-2126CF : 44(H) x 442(W) x 366(D) mm

Weight

FZ-PSES-2126C  : 3.3kg

FZ-PSES-2126CF : 5.47kg

EMI

Comply with FCC Part 15 Class A & CE Mark Approval


Packing Information

 

Model

Carton Dimensions(mm)

pcs/Carton

N.W (KG)

G.W (KG)

FZ-PSES-2126C

530x512x345

5

21

22

FZ-PSES-2126CF

551x488x312

2

14

15

 

Ordering Information

 

FZ-PSES-2126C

24-Port L2 Managed Fast Ethernet PoE Switch + 2 TP/SFP Gigabit Dual Media

FZ-PSES-2126CF

24-Port L2 Managed Fast Ethernet PoE Switch + 2 TP/SFP Gigabit Dual Media (Full Power)

 

Optional SFP Fiber Module

SFP.LC

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 850nm

SFP.LC.M2

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 1310nm 2km

SFP.LC.S10

1000Base-LX GE SFP Fiber Module, LC Single-Mode 10km

SFP.LC.S30

1000Base-LX GE SFP Fiber Module, LC Single-Mode 30km

SFP.LC.S50

1000Base-LX GE SFP Fiber Module, LC Single-Mode 50km

SFP.BL3.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1310nm

SFP.BL5.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1550nm

SFP.BL3.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1310nm

SFP.BL5.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1550nm


We recommend the SFP transceiver from the following vendors:

1.     Fiberzone Pte Ltd

2.     Agilient Technologies

3.     AVAGO Technologies

4.     Finisar Corporation

FZ-PSGS-2112C & FZ-PSGS-2112CF – 12-Port Managed PoE GbE Switch with 2 SFP Dual Media

Description
FZ-PSGS-2112C supports 12 10/100/1000Mbps Auto-negotiation, Auto-MDIX Ethernet ports and Power over Ethernet to IEEE 802.3af compliant devices. It’s fully compliant with the standards of IEEE 802.3/u/x/z/ab/af. It is equipped with 12 Giga TP ports and 2 of which are dual media ports that accommodate optional 10/100/1000Base-T or SFP modules. In addition, the switch implements the QoS (Quality of Service), Mac Filtering Policy, Port Mirror, VLAN and full L2 protocol. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications with security.

 

Key Benefits

PoE Save Your Power Infrastructure Cost

12-PoE ports allow power to be supplied to end devices, such as Wireless Access Points or VoIP Phones, directly through the existing LAN cables. By supplying the power mid-span, you can centralize power distribution and backup without the need to increase infrastructure.

2 Dual Media for Flexible Fiber Connection

11, 12 dual media port are provided for flexible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or long distance fiber backbone attachment. Use of the SFP will disable their corresponding built-in 10/100/1000Base-T connections.

QoS support layer 4 classification

The switch supports not only Layer 2 802.1p Priority Queue control, but also supports programmable higher layer classification and prioritization to enable enhanced Quality of Service (Qos) support for real time applications base on information taken from Layer 2 to Layer 4, such as VoIP.

Q-in-Q VLAN for performance & security

The VLAN feature in the switch offers the benefits of both security and

performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance. VLAN support enabling advanced techniques such as "802.1Q-in-1Q" to be deployed.

802.3ad Port Trunk for Bandwidth Aggregation

The Gigabit ports can be combined together to create a multi-link loadsharing trunk. Up to 6 Gigabit ports can be set up per trunk for bandwidth up to 12Gbps, all traffic is aggregated based on MAC addresses, thus balancing the traffic load. The switch supports up to 6 trunking groups. Port trunks are useful for switch-to-switch cascading, providing very high full-duplex speeds.

802.1x Access Control Improve Network Security

802.1x features enable user authentication for each network access attempt. Port security features allow you to limit the number of MAC addresses per port in order to control the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the number of access stations.

802.1d Compatible & 802.1w Rapid Spanning Tree

For mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in event of any failover switch on the network.

Broadcast/Multicast Storm Control

To limit too many broadcast/multicast flooding in the network, broadcast/multicast storm control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured upper threshold.

 

 
Technical Specifications
FZ-PSGS-2112C & FZ-PSGS-2112CF – 12-Port Managed PoE GbE Switch with 2 SFP Dual Media

Description
FZ-PSGS-2112C supports 12 10/100/1000Mbps Auto-negotiation, Auto-MDIX Ethernet ports and Power over Ethernet to IEEE 802.3af compliant devices. It’s fully compliant with the standards of IEEE 802.3/u/x/z/ab/af. It is equipped with 12 Giga TP ports and 2 of which are dual media ports that accommodate optional 10/100/1000Base-T or SFP modules. In addition, the switch implements the QoS (Quality of Service), Mac Filtering Policy, Port Mirror, VLAN and full L2 protocol. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications with security.

 

Key Benefits

PoE Save Your Power Infrastructure Cost

12-PoE ports allow power to be supplied to end devices, such as Wireless Access Points or VoIP Phones, directly through the existing LAN cables. By supplying the power mid-span, you can centralize power distribution and backup without the need to increase infrastructure.

2 Dual Media for Flexible Fiber Connection

11, 12 dual media port are provided for flexible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or long distance fiber backbone attachment. Use of the SFP will disable their corresponding built-in 10/100/1000Base-T connections.

QoS support layer 4 classification

The switch supports not only Layer 2 802.1p Priority Queue control, but also supports programmable higher layer classification and prioritization to enable enhanced Quality of Service (Qos) support for real time applications base on information taken from Layer 2 to Layer 4, such as VoIP.

Q-in-Q VLAN for performance & security

The VLAN feature in the switch offers the benefits of both security and

performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance. VLAN support enabling advanced techniques such as "802.1Q-in-1Q" to be deployed.

802.3ad Port Trunk for Bandwidth Aggregation

The Gigabit ports can be combined together to create a multi-link loadsharing trunk. Up to 6 Gigabit ports can be set up per trunk for bandwidth up to 12Gbps, all traffic is aggregated based on MAC addresses, thus balancing the traffic load. The switch supports up to 6 trunking groups. Port trunks are useful for switch-to-switch cascading, providing very high full-duplex speeds.

802.1x Access Control Improve Network Security

802.1x features enable user authentication for each network access attempt. Port security features allow you to limit the number of MAC addresses per port in order to control the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the number of access stations.

802.1d Compatible & 802.1w Rapid Spanning Tree

For mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in event of any failover switch on the network.

Broadcast/Multicast Storm Control

To limit too many broadcast/multicast flooding in the network, broadcast/multicast storm control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured upper threshold.

 

 
Technical Specifications

Standard Compliance

n IEEE 802.3 10Base-T

n IEEE 802.3u 100Base-TX

n IEEE 802.3x Flow Control Capability

n IEEE 802.3z 1000Base-X Ethernet

n IEEE 802.3ab 1000Base-TX

n ANSI/IEEE 802.3 Auto-negotiation

n IEEE 802.1q VLAN

n IEEE 802.1d Spanning Tree Protocol.

n IEEE 802.1w Rapid Spanning Trees

n IEEE 802.1x Port-based network access control

n IEEE 802.1p Class of Service

n IEEE 802.3af Power over Ethernet

n IEEE 802.3ad Link Aggregation Control Protocol (LACP)

RoHS Compliance

PoE Specification

n Supports IEEE 802.3af compliant

n Supports Power over Ethernet (PSE) on each Gigabit UTP port

n Full power support for per POE port

n Auto detect powered device and consumption levels

n Supports per port power consumption monitoring

n Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority

n Circuit protection to prevent power interference between ports

n Supports per port PoE State setting

n Supports per port power priority setting

n LED indicators for POE ready and POE activity

Performance

Switching capacity:

n 12 Gigabit Ethernet ports with non-blocking wise speed performance

n 8 K MAC addresses

n 208KB on-chip frame buffer

n Supports Jumbo frame support, up to 9K

n Broadcast/Multicast Storm Suppression

n Port Mirroring

VLAN

n Port-base VLAN

n IEEE802.1q tag-base VLAN, up to 256 active VLANs

n Q-in-Q is an efficient method for enabling Subscriber Aggregation

VSM (Virtual Stacking Management):

n Up to 16 switches can be managed via Single IP limited to any specific Fiberzone models.

n Virtual stacking, no extra stacking hardware is required

n Distributed stacking, no physical central wiring closet is needed

Qos

n Supports Layer 4 TCP/UDP Port and ToS Classification

n Supports 802.1p QoS with two level priority queue

n Supports priority in a Q-in-Q tag

Bandwidth Control

n Supports bandwidth rating per port ingress and egress rate limit 1000Mbps with 1Mbps

Protocol

LACP

n Port trunking with 6 trunking group

n Up to 6 ports for each group

GVRP/GARP

n 802.1q with GVRP/ GARP

Multicasting

n Supports IGMP snooping including active and passive mode

STP/RSTP

n 802.1d/1w

Network Security

n 802.1x access control

n Management Access Policy Control (L2 ACL)

Snmpv1,v2c Network Management

RFC 1213 MIB (MIB-II)

RFC 1757 RMON MIB

Interface MIB

Statistics Group 1

Address Translation MIB

History Group 2

IP MIB

Alarm Group 3

ICMP MIB

Event Group 9

TCP MIB

RFC 1493 Bridge MIB

UDP MIB

RFC 1643 Ethernet MIB

SNMP MIB

Enterprise MIB

 

LED Description

 

LED

Color

Function

Global

POWER

Green

-Lit when +5V power is coming up

Global

CPU

Green

-Blinks when CPU is activity

Port 1-12

LINK/ACT

Green

-Lit when connection with remote device is good

-Blinks when any traffic is present

Port 1-12

10/100/1000Mbps

Green /Amber

-Lit Green when TP link on 1000Mbps speed

-Lit Amber when TP link on 100Mbps speed

-Off when 10Mbps or no link occur

Port 11,12

 

 

-SFP GreenLit when SFP connection with remote device is good

-Blinks when any traffic is present

 

Diagnostic  LED:

System LED

Power

10/100/1000M TP Port Per Port LED

Link/Act, 1000/100Mbps

Gigabit SFP Module LED

SFP

 

Network Interface

Configuration

Connector

Port

10/100Mbps TP Jack (RJ-45)

TP(RJ-45)

1 to 12

1000Mbps SFP Fiber Module Dual Media Auto Detection

SFP

11, 12

 

Cable and Maximum Length:

TP

Cat. 5 UTP cable, up to 100m

1000Base-SX SC M-M

Up to 220/275/500/550m, which depends on Multi-Mode Fiber type

1000Base-LX SC S-M

Single-Mode Fiber, up to10/30/50Km

1000Base-LX WDM SC S-M

Single-Mode Single Fiber, Bidi 20Km

 

Hardware Spec.

Feature

Detailed Description

Power Supply

100~240 V, 50~60 Hz, 200W or 150W

Total Power for PoE

185W or 130W

Ambient Temperature

0 to 40 C

Weight

3kg

Safety

Comply with FCC Part 15 Class A & CE Mark Approval

Humidity

5% to 90%

Dimensions

44(H) x 442 (W) x 209 (D) mm

 

Packing Information

Carton Dimensions (mm)

pcs/Carton

N.W (KG)

G.W (KG)

530x512x345

5

19.5

20

 

Order Information

FZ-PSGS-2112CF

12-Port GbE L2 Managed PoE Switch with 2 SFP Dual Media (185W)

FZ-PSGS-2112C

12-Port GbE L2 Managed PoE Switch with 2 SFP Dual Media (130W)

SFP.LC

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 850nm

SFP.LC.M2

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 1310nm 2km

SFP.LC.S10

1000Base-LX GE SFP Single-Mode 10Km Fiber Module 1310nm

SFP.LC.S30

1000Base-LX GE SFP Single-Mode 30Km Fiber Module 1310nm

SFP.L5.S50

1000Base-LX GE SFP Single-Mode 50Km Fiber Module 1550nm

SFP.BL5.S10

1000Base-LX GE SFP BiDi_LC 10Km Module Single Fiber 1550nm, Type 1

SFP.BL3.S10

1000Base-LX GE SFP BiDi_LC 10Km Module Single Fiber 1310nm, Type 2

SFP.BL5.S20

1000Base-LX GE SFP BiDi_LC 20Km Module Single Fiber 1550nm, Type 1

SFP.BL3.S20

1000Base-LX GE SFP BiDi_LC 20Km Module Single Fiber 1310nm, Type 2

 

Note:

We recommend the SFP transceiver from the following vendors:

1. Fiberzone Pte Ltd

2. Agilient Technologies

3. AVAGO Technologies

4. Finisar Corporation

FZ-PSGS-2224L & FZ-PSGS-2224LF – 24-Port GbE L2 Plus Managed PoE Switch with 4 SFP Dual Media

Description
FZ-PSGS-2224L/LF, a 24-Port GbE L2 Plus Managed PoE Switch, is a standard switch that meets all IEEE 802.3/u/x/z/ab/af standards. The switch includes 20-Port 10/100/1000Mbps TP with PoE function and 4-Port Gigabit TP/SFP Fiber dual media management switch. It is an ideal solution for wireless AP, VoIP phones, security video cameras. The switch can be managed through RS-232 serial port, or through Ethernet port using CLI or Web-based management unit, associated with SNMP agent. With the SNMP agent, the network administrator can logon the switch to monitor, configure and control each port’s activity in a friendly way. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications. In addition, the switch features comprehensive and useful functions such as DHCP Snooping (Including Option 82), QoS (Quality of Service), Spanning Tree, RSTP/MSTP, VLAN, Port Trunking, Bandwidth Control, Port Security, MVR, SNMP/RMON, LLDP and IGMPv3 Snooping capability via the intelligent software.It is suitable for both metro-LAN and office applications.
Others the switch increase support the Power saving for reduce the power consumption. It could efficient saving the switch power with auto detect the client idle and provides different power. It also could to support the SSH/SSL/TACACS+/RADIUS for security network management.
Warning: The serial product has two kinds model with FZ-PSGS-2224L (185W) and FZ-PSGS-2224LF (380W)

 

Key Benefits

n4 dual Media for flexible fiber connection
nSupport Jumbo Frame size up to 9KB
nIEEE 802.1X Access control improve network security
nPort Mirroring helps supervisor monitoring network
nSupport Q-in-Q(Double-tag)
nIEEE802.1Q tag-base VLAN, 4094 entries max and port-base VLAN
nIEEE 802.1d Compatible, 802.1w Rapid Spanning Tree and 802.1s
Multiple Spanning Tree
nSupport IEEE 802.3af compliant with Endpoint with 48VDC power
through RJ-45 pin 1, 2, 3, 6. for PoE Requirement
nUnknown Unicast/Broadcast/Multicast Storm Control
nMulticast VLAN management for IPTV
nIP-MAC-Port binding for LAN security
nSupport QoS (QCL/QCE) for traffic control
nSupport ACL based on Ethernet Type / ARP / IPv4 for packets permit
or deny, rate limitation and port copy
nDHCP Snooping (Including DHCP Option 82)
nSupport IGMPv3 snooping and IGMP proxy
nSSL/ SSH/TACACS+/RADIUS for management
n185 or 380 watts of total power diversified options
nSupport “power saving” for Green Ethernet requirement
nSupport LLDP (Link Layer Discovery Protocol, IEEE802.1AB) provides a
standards-based method for enabling switches to advertise
themselves

 

Benefits

PoE Saves Your Power Infrastructure and Installation Cost

24-Port allow power (185W or 380W) to be supplied to end devices, such as Wireless Access Points or VoIP Phones, directly through the existing LAN cables, eliminating costs for additional AC wiring and reducing installation cost. It frees your wireless AP deployment from restriction due to power outlet location. By supplying the power end-span, you can centralize power distribution and backup without the need to increase infrastructure.

QoS with four priority queues

The QoS(Quality Of Service) feature provides four internal queues to support four different classifications of traffic. High priority packet streams experience less delay inside the switch, which supports lower latency for certain delay-sensitive traffic. The FZ-PSGS-2224L/LF can classify the packet as one of the four priorities according to vip port, 802.1p priority tag, DiffServ. The QoS operates at full wire speed. The actual scheduling at each egress port can be based upon a strict priority, weighted round robin.

Port Mirroring

This mechanism helps track network errors or abnormal packet transmission without interrupting the flow of data, allowing ingress traffic to be monitored by a single port that is defined as mirror capture port. The mirror capture port can be any 10/100 port, 10/100/1000 port. Mirroring multiple ports is possible but can create congestion at the mirror capture port.

Q-in-Q VLAN for performance & security

The Q-in-Q (Double-Tag) VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance use of double VLAN tags.

Isolated Group, provides protection for certain ports

The isolated group feature allows certain ports to be designated as protected. All other ports are non-isolated. Traffic between isolated group members is blocked. Traffic can only be sent from isolated group to non-isolated group.

Mac-based 802.3ad LACP with automatic link fail-over

Dynamic fail-over means packets will not get assigned to any trunk member port that has failed. If one of the ports were to fail, traffic will automatically get distributed to the remaining active ports.

802.1X Access Control improves network security

802.1X features enable user authentication for each network access attempt. Port security features allow you to limit the number of MAC addresses per port in order to control the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the number of access stations.

DHCP Snooping (Including DHCP Option 82)

This DHCP Snooping enables the Dynamic Host Configuration Protocol (DHCP) relay agent information (option 82) was included in the feature. To include information about itself and the attached client when forwarding DHCP requests from a DHCP client to a DHCP server via Trust Port. The DHCP server can use this information to assign IP addresses?gateway?subnet mask?DNS for each subscriber of a service-provider network. The DHCP Snooping is using Trust Port and Trust DHCP Server IP Address to filter the illegal DHCP server traffic.

802.1D Compatible & 802.1w Rapid Spanning Tree & 802.1s Multiple Spanning Tree

For mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in event of any fail-over switch on the network.

MSTP is according to IEEE 802.1Q 2005 Clause 13 – Multiple Spanning Tree Protocol. MSTP allows frames assigned to different VLANs to follow separate paths, each based on an independent Multiple Spanning Tree Instance (MSTI), within Multiple Spanning Tree (MST) Regions composed of LANs and or MSTBridges.

4 dual media ports for flexible fiber connection

4-Port 21,22,23,24 dual media ports are provided for flexible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or long distance fiber backbone attachment. Use of the SFP will disable their corresponding built-in 10/100/1000Base-T connections.

Broadcast/Multicast/Unknown-Unicast Storm Control

To limit too many broadcast/multicast/unknown-unicast flooding in the network, broadcast/multicast storm control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured upper threshold.

MVR

Multicast VLAN Registration (MVR) can support carrier to serve content provider using multicast for Video streaming application in the network. Each content provider Video streaming has a dedicated multicast VLAN. The MVR routes packets received in a multicast source VLAN to one or more receive VLANs. Clients are in the receive VLANs and the multicast server is in the source VLAN.

IP-MAC-Port Binding

The IP network layer uses a four-byte address. The Ethernet link layer uses a six-byte MAC address. Binding these two address types together allows the transmission of data between the layers. The primary purpose of IP-MAC binding is to restrict the access to a switch to a number of authorized users. Only the authorized client can access the Switch’s port by checking the pair of IP-MAC Addresses and port number with the pre-configured database. If an unauthorized user tries to access an IP-MAC binding enabled port, the system will block the access by dropping its packet.

Access Control List (ACL)

The ACLs are divided into EtherTypes. IPv4, ARP protocol, MAC and VLAN parameters etc. Here we will just go over the standard and extended access lists for TCP/IP. As you create ACEs for ingress classification, you can assign a policy for each port, the policy number is 1-8, however, each policy can be applied to any port. This makes it very easy to determine what type of ACL policy you will be working with.

SSL and SSH for secure Management

Secure Sockets Layer (SSL) supports the encryption for all HTTP traffic, allowing secure access to the browser-based management GUI in the switch. And Secure Shell (SSH) which supports the encryption for all transmitted data for secure, remote command-line interface (CLI) access over IP networks

TACACS+ for Management Authentication

The switch supports the TACACS+ authentication for secure switch CLI Logon. It provides more secure authentication for management.

LLDP (IEEE 802.1AB Link Layer Discovery Protocol):

The switch supports the LLDP that automated device discovery protocol for easy mapping by network management applications.

IGMPv3 Snooping

By default, layer 2 Ethernet switches treat IP multicast traffic in the same manner as broadcast traffic – namely, by forwarding frames received on one interface to all other interfaces. This may create excessive traffic on the network and degrade the performance of hosts attached to the switches. The IGMPv3 snooping can significantly reduce traffic from streaming media and other bandwidth-intensive IP multicast applications.

IGMP Proxy

The IGMP proxy and IGMPv3 Snooping is the same functional target, but mechanism has some thing different as below:

—IGMP Proxy can send v1/v2 IGMP query together.

—IGMP Proxy supports General Query Mac Response Timeout for 
   
checking the "client alive status" and speed up the convergence of 
   
multicast group member.

—IGMP Proxy provides Specific (Last member) Query to check (can 
   
be multiple times) whether other members interest in the same 
   
multicast group exist when the port receives IGMP leave.

—IGMP Proxy checks (can be multiple times) the latest status of the 
   
group member by scheduled polling from General/Specific Query. It 
   
avoids instant port link-down that makes the members to be 
   
removed from multicast group.

The IGMP Proxy is providing better performance than IGMPv3 Snooping for IGMP join and leave message exchange in the switch.

Power Saving

The power saving provide detection the client idle and cable length to provide the different power. It could efficient to save the switch power and reduce the power consumption.

 
Technical Specifications

n Standard compliance        

IEEE 802.3 10Base-T Ethernet(twisted-pair copper)

IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)

IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper)

IEEE 802.3z 1000Base-SX/LX Ethernet

IEEE 802.3x Flow Control capability

IEEE 802.1Q VLAN

IEEE 802.1p Class of Service

IEEE 802.1X Access Control

IEEE 802.1D Spanning Tree

IEEE 802.1w Rapid Spanning Tree

IEEE 802.1s Multiple Spanning Tree

IEEE 802.3ad Link Aggregation Control Protocol (LACP)

IEEE 802.3af PoE

nRoHS Compliance

nPower Saving for green ethernet Requirement

nLLDP (IEEE802.1AB) automated device discovery protocol for
  easy mapping by network management applications

nPerformance

  Switching capacity:

  —24 Gigabit Ethernet ports with non-blocking wise speed 
     
performance.

  —48Gbps switch capacity

  —8 K MAC addresses

  —Supports Jumbo frame, up to 9K

  —Unknown Unicast/Broadcast/Multicast Storm Suppression

  —Port Mirroring

      VLAN

  —Port-base VLAN

  —IEEE802.1Q tag-base VLAN, up to 4k active VLANs

  —Support the Q-in-Q (Double-tag)

  —Support MVR (Multicast VLAN Registration)

  VSM (Virtual Stacking Management):

  —Up to 16 switches can be managed via Single IP limited to any 
     
specific Fiberzone models.

  —Virtual stacking, no extra stacking hardware is required

  —Distributed stacking, no physical central wiring closet is needed

   QoS

  —Supports Port Based, 802.1p and Diffserv (IPv4 ) QoS packet
      
classification

  —Supports two scheduling, WRR and Strict

  —Supports 802.1p QoS with four level priority queue

      Bandwidth Control

  —Supports bandwidth rating per port ingress and egress rate limit 
     
500Kbps~1000Mbps with 1Kbps

nProtocol

  LACP

  —Port trunking with 12 trunking group

  —Up to 16 ports for each group.

      GVRP/GARP

   —802.1q with GVRP/ GARP

  Multicasting

  —Supports IGMPv3 snooping including active and passive mode

  —Supports IGMP proxy including active and passive mode

  STP/RSTP/MSTP

  —802.1D/1w/1s

nPoE Specification

  —24 IEEE802.3af PoE PSE ports

  —Endpoint with 48VDC power through RJ-45 pin 1, 2, 3, 6.

  —PoE-PSE activity LED indicator.

  —Auto detect powered device and consumption levels

  —Supports per port power consumption monitoring

  —Smart feature for PD on/off, PD detection, power level, PD status
      
and power feeding priority

  —Circuit protection to prevent power interference between ports

  —Supports per port PoE state setting

  —Supports per port power priority setting

  —185 or 380 watts of total power diversified options

nNetwork Security

  —802.1X access control for port based and MAC based 
     
authentication

  —Management access policy control

  —Access Control List

  —IP-MAC-Port binding

  —DHCP Snooping (Including DHCP Option 82)

  —SSL/ SSH for Management

  —TACACS+ for Management Authentication

nSNMPv1,v2c,v3 Network Management

 

nRFC 1213 MIB (MIB-II)

nRFC 1757 RMON MIB

  nInterface MIB

   nStatistics Group 1

  nAddress Translation MIB

   nHistory Group 2

  nIP MIB

   nAlarm Group 3

  nICMP MIB

   nEvent Group 9

  nTCP MIB

nRFC 1493 Bridge MIB

  nUDP MIB

nRFC 1643 Ethernet MIB

  nSNMP MIB

nEnterprise MIB

 

 

nLED Description

 

LED

Color

Function

System LED

 POWER

Green

Lit when +5V DC power is on and good

 FAN1, FAN2

Green

Lit when FAN1, FAN2 is normal status

Off when FAN1, FAN2 is bad or malfunctioning (lower rotation)

10/100/1000 Ethernet TP Port 1 to 24 LED

 LINK/SPD/ACT

Green/

Amber

Lit Green when TP link on 1000Mbps speed

Lit Amber when TP link on 100 or 10Mbps speed

Blinks when any traffic is present

POE

Green

Lit when PoE Power is active

Off when PoE Power is bad or disable

1000SX/LX Gigabit Fiber Port 21 to 24 LED

 SFP(LINK/ACT)

Green

Lit when connection with the remote device is good

Blinks when any traffic is present

Off when module connection is not good

 

nNetwork Interface

 

Configuration

Connector

Port

10/100/1000 Mbps TP Jack (RJ-45)

TP(RJ-45)

1 to 20

1000Mbps SFP Fiber Module

Dual Media Auto Detection

TP(RJ-45) / SFP

21 to 24

 

 

 

nHardware Spec.

 

      Feature

Detailed Description

                            

                         

Power Characteristics        

Voltage : 100~240 V

Frequency : 50~60 Hz

PoE Power:

Max. 15W ( in case no PD device  connected)

Max. 185W ( with 12 x 15.4W PD device connected ) –PSGS-2224L

Max. 380W ( with 24 x 15.4W PD device connected ) –PSGS-2224LF

Ambient Temperature

0° to 40°C

Humidity   

5% to 90%

Dimensions

FZ-PSGS-2224L: 44(H) ´ 442(W) ´ 248 (D) mm

FZ-PSGS-2224LF: 44(H) ´ 442(W) ´ 366 (D) mm

Weight

FZ-PSGS-2224L: 3.8 Kg

FZ-PSGS-2224LF: 5.7 Kg

EMI

Comply with FCC Part 15 Class A & CE Mark Approval

 

 

 

Packing Information

 

 

Model

Carton Dimensions(mm)

pcs/Carton

N.W (KG)

G.W (KG)

FZ-PSGS-2224L

515x345x391

3

13 Kg

14 Kg

FZ-PSGS-2224LF

551x488x312

2

14.4 Kg

15.4 Kg

 

Ordering Information

 

FZ-PSGS-2224L

24-Port GbE L2 Plus Managed PoE Switch with 4 SFP Dual Media

FZ-PSGS-2224LF

24-Port GbE L2 Plus Managed PoE Switch with 4 SFP Dual Media (Full Power)

 

Optional SFP Module

 

SFP.LC

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 850nm

SFP.LC.M2

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 1310nm 2km

SFP.LC.S10

1000Base-LX GE SFP Fiber Module, LC Single-Mode 10km

SFP.LC.S30

1000Base-LX GE SFP Fiber Module, LC Single-Mode 30km

SFP.LC.S50

1000Base-LX GE SFP Fiber Module, LC Single-Mode 50km

SFP.BL3.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1310nm

SFP.BL5.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1550nm

SFP.BL3.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1310nm

SFP.BL5.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1550nm

 

Note :

We recommend the SFP transceiver from the following vendors:

1. Fiberzone Pte Ltd

2. Agilient Technologies

3. AVAGO Technologies

4. Finisar Corporation

FZ-PSGS-2208C & FZ-PSGS-2208CF – 8-Port GbE L2 Plus Managed PoE Switch with 2 SFP Dual Media

Description
FZ-PSGS-2208C series PoE Switch , a 8-port Gigabit Plus Managed PoE Switch, is a standard switch that meets all IEEE IEEE 802.3/u/x/z/ab/af standards. It switch includes 6-Port 10/100/1000Mbps TP with PoE function and 2-Port Gigabit TP/SFP Fiber. It is an ideal solution for wireless AP, VoIP phones and security video cameras.
It switch can be managed through RS-232 serial port, or through Ethernet port using CLI or Web-based management unit, associated with SNMP agent. With the SNMP agent, the network administrator can manage switch, configure and control in a friendly way. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications.
In addition, the switch features comprehensive and useful functions such as DHCP Snooping (Including Option 82), QoS (Quality of Service), Spanning Tree, RSTP/MSTP, VLAN, Port Trunking, Bandwidth Control, Port Security, MVR, SNMP/RMON, LLDP and IGMPv3 Snooping capability via the intelligent software. It is suitable for both metro-LAN and office applications.
Others the switch increase support the Power saving for reduce the power consumption. It could efficient saving the switch power with auto detect the client idle and cable length to provide different power. It also could to support the SSH/ SSL/ TACACS+/ RADIUS for security network management.
Warning: The serial product has two kinds model with FZ-PSGS-2208C (65W) and FZ-PSGS-2208CF (130W)

 

Key Benefits

n2 dual Media for flexible fiber connection

nSupport Jumbo Frame size up to 9KB

nIEEE 802.1X Access control improve network security

nPort Mirroring helps supervisor monitoring network

nSupport Q-in-Q(Double-tag)

nIEEE802.1Q tag-base VLAN, 4094 entries and port-base VLAN.

nIEEE 802.1D Compatible, 802.1w Rapid Spanning Tree and 802.1s 
 
Multiple Spanning Tree

nUnknown Unicast/Broadcast/Multicast Storm Control

nMulticast VLAN Registration for IPTV

nIP-MAC-Port binding for LAN security

nSupport QoS (QCL/QCE) for traffic control

nSupport ACL based on Ethernet Type / ARP / IPv4 for packets permit 
 
or deny, rate limitation and port copy

nDHCP Snooping & DHCP option 82

nIGMPv3 Snooping & IGMP Proxy

nSSH/SSL/TACACS+/RADIUS  for security network management

nSupport "power saving" for Green Ethernet requirement

nSupport LLDP (Link Layer Discovery Protocol, IEEE802.1AB) provides a
 
standards-based method for enabling switches to advertise 
 
themselves

nIEEE802.3af Power Over Ethernet compliant

n65 or 130 watts of total power diversified options

 

Benefits

2 dual media for flexible fiber connection

2-Port 7 and 8 dual media port are provided for flexible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or long distance fiber backbone attachment. Use of the SFP will disable their corresponding built-in 10/100/1000Base-T connections.

Port Mirroring

This mechanism helps track network errors or abnormal packet transmission without interrupting the flow of data, allowing ingress traffic to be monitored by a single port that is defined as mirror capture port. The mirror capture port can be any 10/100 port, 10/100/1000 port. Mirroring multiple ports is possible but can create congestion at the mirror capture port.     

Q-in-Q VLAN for Performance & Security

The Q-in-Q (Double-Tag)VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance and use of double VLAN tags.

Isolated Group, provides protection for certain ports

The isolated group feature allows certain ports to be designated as protected. All other ports are non-isolated. Traffic between isolated group members is restricted. Traffic can only be sent from isolated group to non-isolated group.

Mac-based 802.3ad LACP with automatic link fail-over

Dynamic fail-over means packets will not get assigned to any trunk member port that has failed. If one of the ports were to fail, traffic will automatically get distributed to the remaining active ports.

802.1X Access Control Improve Network Security

802.1X features enable user authentication for each network access attempt. Port security features allow you to limit the number of MAC addresses per port in order to control the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the number of access stations.

802.1D Compatible, 802.1 w Rapid Spanning Tree & 802.1s Multiple Spanning Tree

For mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in event of any fail-over switch on the network.

MSTP is according to IEEE 802.1Q 2005 Clause 13 – Multiple Spanning Tree Protocol. MSTP allows frames assigned to different VLANs to follow separate paths, each based on an independent Multiple Spanning Tree Instance (MSTI), within Multiple Spanning Tree (MST) Regions composed of LANs and or MST Bridges.

Unknown-Unicast /Broadcast/Multicast Storm Control

To limit too many broadcast/multicast flooding in the network, broadcast/multicast storm control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured upper threshold.

MVR

Multicast VLAN Registration (MVR) can support carrier to serve content provider using multicast for Video streaming application in the network. Each content provider Video streaming has a dedicated multicast VLAN. The MVR routes packets received in a multicast source VLAN to one or more receive VLANs. Clients are in the receive VLANs and the multicast server is in the source VLAN.

IP-MAC-Port Binding

The IP network layer uses a four-byte address. The Ethernet link layer uses a six-byte MAC address. Binding these two address types together allows the transmission of data between the layers. The primary purpose of IP-MAC binding is to restrict the access to a switch to a number of authorized users. Only the authorized client can access the Switch’s port by checking the pair of IP-MAC Addresses and port number with the pre-configured database. If an unauthorized user tries to access an IP-MAC binding enabled port, the system will block the access by dropping its packet.

Access Control List (ACL)

The ACLs are divided into EtherTypes. IPv4, ARP protocol, MAC and VLAN parameters etc. Here we will just go over the standard and extended access lists for TCP/IP. As you create ACEs for ingress classification, you can assign a policy for each port, the policy number is 1-8, however, each policy can be applied to any port. This makes it very easy to determine what type of ACL policy you will be working with.

PoE Saves Your Power Infrastructure Cost

8-PoE ports allow power (FZ-PSGS-2208C provides 65W and FZ-PSGS-2208CF provides 130W) to be supplied to end devices, such as Wireless Access Point IP cameras or VoIP Phones, directly through the existing LAN cables, eliminating costs for additional AC wiring and reducing installation cost. It frees your wireless AP deployment from restriction due to power outlet location. By supplying the power mid-span, you can centralize power distribution and backup without the need to increase infrastructure.

IGMPv3 Snooping

By default, layer 2 Ethernet switches treat IP multicast traffic in the same manner as broadcast traffic – namely, by forwarding frames received on one interface to all other interfaces. This may create excessive traffic on the network and degrade the performance of hosts attached to the switches. The IGMPv3 snooping can significantly reduce traffic from streaming media and other bandwidth-intensive IP multicast applications.

IGMP Proxy

The IGMP proxy and IGMPv3 Snooping is the same functional target, but mechanism has some thing different as below:

—IGMP Proxy can send v1/v2 IGMP query together.

—IGMP Proxy supports General Query Mac Response Timeout for 
   
checking the "client alive status" and speed up the convergence of 
   
multicast group member.

—IGMP Proxy provides Specific (Last member) Query to check (can 
   
be multiple times) whether other members interest in the same 
   
multicast group exist when the port receives IGMP leave.

—IGMP Proxy checks (can be multiple times) the latest status of the 
   
group member by scheduled polling from General/Specific Query. It 
   
avoids instant port link-down that makes the members to be 
   
removed from multicast group.

The IGMP Proxy is provide better performance than IGMPv3 Snooping for IGMP join and leave message exchange in the switch.

Isolated Group, provides protection for certain ports

The isolated group feature allows certain ports to be designated as protected. All other ports are non-isolated. Traffic between isolated group members is blocked. Traffic can only be sent from isolated group to non-isolated group.

SSL and SSH for secure Management

Secure Sockets Layer (SSL) supports the encryption for all HTTP traffic, allowing secure access to the browser-based management GUI in the switch. And Secure Shell (SSH) which supports the encryption for all transmitted data for secure, remote command-line interface (CLI) access over IP networks

TACACS+ for Management Authentication

The switch supports the TACACS+ authentication for secure switch CLI Logon. It provides more secure authentication for management.

LLDP (IEEE 802.1AB Link Layer Discovery Protocol)

The switch supports the LLDP that automated device discovery protocol for easy mapping by network management applications.

Power Saving

The power saving provide detection the client idle and cable length to provide the different power. It could efficient to save the switch power and reduce the power consumption.

 

 
Technical Specifications

nStandard compliance

  —IEEE 802.3 10Base-T Ethernet

  —IEEE 802.3u 100Base-TX Fast Ethernet

  —IEEE 802.3ab 1000Base-T Ethernet

  —IEEE 802.3z 1000Base-X Ethernet

  —IEEE 802.3ad Port trunk with LACP

  —IEEE 802.3x Flow Control capability

  —IEEE 802.1Q VLAN

  —IEEE 802.1p Class of Service

  —IEEE 802.1X Access Control

  —IEEE 802.1D Spanning Tree

  —IEEE 802.1w Rapid Spanning Tree

  —IEEE 802.1s Multiple Spanning Tree

  —IEEE 802.1AB LLDP (Link Layer Discovery Protocol)

  —IEEE 802.3ad Link Aggregation Control Protocol (LACP)

  —IEEE 802.3af 

nRoHS Compliance

nPower Saving green ethernet Requirement

nLLDP automated device discovery protocol for easy mapping by
 
network management applications

nPerformance

  Switching capacity:

  —8 Gigabit Ethernet ports with non-blocking wise speed
      
performance.

  —16Gbps switch capacity

  —8 K MAC addresses

  —Supports Jumbo frame , up to 9K

  —Unknown Unicast/Broadcast/Multicast Storm Suppression

  —Port Mirroring

 VLAN

  —Port-base VLAN

  —IEEE802.1Q tag-base VLAN, up to 4k active VLANs

  —Support the Q-in-Q (Double-tag)

  —Support MVR (Multicast VLAN Registration)

  VSM (Virtual Stacking Management)

  —Up to 16 switches can be managed via Single IP limited to any 
     
specific Fiberzone models.

  —Virtual stacking, no extra stacking hardware is required

  —Distributed stacking, no physical central wiring closet is needed

 Qos

  —Supports Port Based, 802.1p and Diffserv (IPv4 ) QoS packet 
      
classification

  —Supports two scheduling, WRR and Strict

  —Supports 802.1p QoS with four level priority queue

 Bandwidth Control

  —Supports bandwidth rating per port ingress and egress rate limit
      
500Kbps~1000Mbps with 1Kbps

nProtocol

  LACP

  —Port trunking with 4 trunking group

  —Up to 4 ports for each group.

  GVRP/GARP

  —802.1Q with GVRP/ GARP

  Multicasting

  —Supports IGMPv3 snooping including active and passive mode

  —Supports IGMP proxy including active and passive mode

  STP/RSTP/MSTP

  —802.1D/1w/1s

nNetwork Security

  —802.1X access control for port based and MAC based 
     
authentication

  —Management Access Policy Control (ACL)

  —Access control List

  —IP-MAC-Port binding

  —DHCP Snooping (Including DHCP Option 82)

  —SSL/ SSH for Management

  —TACACS+ for Management Authentication

nPoE Features

  —8 IEEE802.3af PoE PSE ports

  —Endpoint with 48VDC power through RJ-45 pin 1, 2, 3, 6

  —PoE-PSE activity LED indicator

  —Supports per port PoE state setting

  —Auto detect powered device and consumption levels

  —Supports per port power consumption monitoring

  —Smart feature for PD on/off, PD detection, power level, PD status 
     
and power feeding priority

  —Circuit protection to prevent power interference between ports

  —Supports per port power priority setting

  —65 or 130 watts of total power diversified options

nSNMPv1,v2c,v3 Network Management

 

nRFC 1213 MIB (MIB-II)

nRFC 1757 RMON MIB

  nInterface MIB

  nStatistics Group 1

  nAddress Translation MIB

  nHistory Group 2

  nIP MIB

  nAlarm Group 3

  nICMP MIB

  nEvent Group 9

  nTCP MIB

nRFC 1493 Bridge MIB

  nUDP MIB

nRFC 1643 Ethernet MIB

  nSNMP MIB

nEnterprise MIB

nLED Description

LED

Color

Function

System LED

 PWR

Green

Lit when  power is coming up

10/100/1000 Ethernet TP Port 1 to 8 LED

 LINK/ACT/SPD

Green/

Amber

Lit Green when TP link on 1000Mbps speed

Lit Amber when TP link on 10/100Mbps speed

Blinks when any traffic is present

PoE

Green

Lit when PoE Power is active

1000SX/LX Gigabit Fiber Port 7, 8 LED

 SFP(LINK/ACT)

Green

Lit when connection with the remote device is good

Blinks when any traffic is present

Off when module connection is not good

 

nNetwork Interface

 

Configuration

Connector

Port

10/100/1000Mbps TP Jack (RJ-45)

TP(RJ-45)

1 to 8

1000Mbps SFP Fiber Module

Dual Media Auto Detection

SFP

7, 8

 

nHardware Spec.

 

Feature

Detailed Description

                            

Power Characteristics             

                

Voltage : 100~240 V

Frequency : 50~60 Hz

PoE Power

Max. 65W ( with 4 x 15.4W PD device connected ) –PSGS-2208C

Max. 130W ( with 8 x 15.4W PD device connected ) –PSGS-2208CF

Ambient Temperature

0° to 40°C

Humidity   

5% to 90%

Dimensions

44( H) x 280(W) x 166(D) mm

Weight

1.9kg

EMI

Comply with FCC Part 15 Class A & CE Mark Approval

 

Packing Information

 

Carton Dimensions (mm)

pcs/Carton

N.W (KG)

G.W (KG)

493x430x352

5

11.75

12.75

 

Ordering Information

 

FZ-PSGS-2208C

8-Port GbE L2 Plus Managed PoE Switch with 2 SFP Dual Media

FZ-PSGS-2208CF

8-Port GbE L2 Plus Managed PoE Switch with 2 SFP Dual Media (Full Power)

 

Optional SFP Module

 

SFP.LC

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 850nm

SFP.LC.M2

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 1310nm 2km

SFP.LC.S10

1000Base-LX GE SFP Fiber Module, LC Single-Mode 10km

SFP.LC.S30

1000Base-LX GE SFP Fiber Module, LC Single-Mode 30km

SFP.LC.S50

1000Base-LX GE SFP Fiber Module, LC Single-Mode 50km

SFP.BL3.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1310nm

SFP.BL5.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1550nm

SFP.BL3.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1310nm

SFP.BL5.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1550nm


Note:

We recommend the SFP transceiver from the following vendors:

1. Fiberzone Pte Ltd

2. Agilient Technologies

3. AVAGO Technologies

4. Finisar Corporation

FZ-PSES-2410C & FZ-PSES-2410CF – 8-Port L2 Plus Managed Fast Ethernet PoE Switch + 2 TP/SFP Gigabit Dual Media

Description
FZ-PSES-2410C/CF, a 8-Port Fast Ethernet L2 Plus PoE Managed Switch with 2 SFP Dual Media. The switch implemented 8 10/100Mbps TP with PoE function and 2-Port Gigabit TP/SFP Fiber dual media management switch. It is an ideal solution for wireless AP, VoIP phones, security video cameras. It’s fully compliant with the standards of IEEE 802.3/u/x/z/ab/af.
It switch can be managed through RS-232 serial port, or through Ethernet port using CLI or Web-based management unit, associated with SNMP agent. With the SNMP agent, the network administrator can logon the switch to monitor, configure and control each port’s activity in a friendly way. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications. In addition, the switch features comprehensive and useful functions such as QoS (Quality of Service), Spanning Tree, VLAN, Port Trunking, Bandwidth Control, Port Security, SNMP/RMON, IGMP Proxy and IGMPv3 Snooping capability via the intelligent software. In addition, the switch features comprehensive and useful function such as DHCP Option 82, DHCP Snooping, IP-MAC-Port Binding, MVR. It is suitable for both metro-LAN and office application. It is suitable for both metro-LAN and office applications.
Others the switch increase support the Power saving for reduce the power consumption. It could efficient saving the switch power with auto detect the client idle and cable length to provide different power. It also could to support the SSH/SSL/TACACS+/RADIUS for security network management.

 

Key Benefits

n2 dual media for flexible fiber connection

nIEEE 802.1X Access Control improve network security

nPort Mirroring helps supervisor monitoring network

nSupport Q-in-Q(Double-tag)

nIEEE802.1Q tag-base VLAN, 4094 entries max and port-base VLAN

nIEEE 802.1D Compatible, 802.1w Rapid Spanning Tree and 802.1s 
 
Multiple Spanning Tree

nUnknown Unicast/Broadcast/Multicast Storm Control

nMulticast VLAN Management for IPTV

nIP-MAC-Port binding for LAN security

nACL based on Ethernet Type / ARP / IPv4 for packets permit or 
 
deny, rate limitation and port copy

nDHCP Snooping (Including DHCP Option 82)

nIEEE802.3af Power Over Ethernet compliant

nSSH/SSL/TACACS+/RADIUS  for security network management

nSupport LLDP (Link Layer Discovery Protocol, IEEE802.1AB) provides 
 
a standards-based method for enabling switches to advertise 
 
themselves

nSupport IGMPv3 Snooping

n65 or 130 watts of total power diversified options

nSupport  "power saving" for green ethernet requirement

 

Benefits

QoS with four priority queues

The QoS(Quality Of Service) Control List (QCL) feature provides four internal queues to support four different classifications of traffic. High priority packet streams experience less delay inside the switch, which supports lower latency for certain delay-sensitive traffic. The FZ-PSES-2410C/CF can classify the packet as one of the four priorities according to vip port, 802.1p priority tag, DiffServ and/or IP TOS, IPv4 and UDP/TCP application traffics. The QoS operates at full wire speed. The actual scheduling at each egress port can be based upon a strict priority, weighted round robin.

DHCP Snooping (Including DHCP Option 82)             

This DHCP Snooping enables the Dynamic Host Configuration Protocol (DHCP) relay agent information (option 82) was included in the feature. To include information about itself and the attached client when forwarding DHCP requests from a DHCP client to a DHCP server via Trust Port. The DHCP server can use this information to assign IP addresses??/SPAN>gateway??/SPAN>subnet mask??/SPAN>DNS for each subscriber of a service-provider network. The DHCP Snooping is using Trust Port and Trust DHCP Server IP Address to filter the illegal DHCP server traffic.

DHCP Relay

The DHCP Relay Agent makes it possible for DHCP broadcast messages to be sent over routers that do not support forwarding of these types of messages. The DHCP Relay Agent is therefore the routing protocol that enables DHCP clients to obtain IP addresses from a DHCP server on a remote subnet, or which is not located on the local subnet. If you have no configured DHCP Relay Agent, your clients would only be able to obtain IP addresses from the DHCP server which is on the same subnet.

IP-MAC-Port Binding

Binding these two address types together allows the transmission of data between the layers to enhance the switch security. The primary purpose of IP-MAC binding is to restrict the access to a switch to a number of authorized users. Only the authorized client can access the Switch?? port by checking the pair of IP-MAC Addresses and port number with the pre-configured database. If an unauthorized user tries to access an IP-MAC binding enabled port, the system will block the access by dropping its packet.

MVR

Multicast VLAN Registration (MVR) can support carrier to serve content provider using multicast for Video streaming application in the network. Each content provider Video streaming has a dedicated multicast VLAN. The MVR routes packets received in a multicast source VLAN to one or more receive VLANs. Clients are in the receive VLANs and the multicast server is in the source VLAN.

IGMP Snooping

By default, layer 2 Ethernet switches treat IP multicast traffic in the same manner as broadcast traffic ??namely, by forwarding frames received on one interface to all other interfaces. This may create excessive traffic on the network and degrade the performance of hosts attached to the switches. The IGMP snooping can significantly reduce traffic from streaming media and other bandwidth-intensive IP multicast applications.

—IGMP Snooping can send v1/v2 IGMP query together.

—IGMP Snooping supports General Query Mac Response Timeout for 
   
checking the "client alive status" and speed up the convergence of 
   
multicast group member.

—IGMP Snooping provides Specific (Last member) Query to check 
   
(can be multiple times) whether other members interest in the 
   
same multicast group exist when the port receives IGMP leave.

—IGMP Snooping checks (can be multiple times) the latest status of 
   
the group member by scheduled polling from General/Specific  
   
Query. It avoids instant port link-down that makes the members to 
   
be removed from multicast group.

Port Mirroring

This mechanism helps track network errors or abnormal packet transmission without interrupting the flow of data, allowing ingress traffic to be monitored by a single port that is defined as mirror capture port. The mirror capture port can be any 10/100 port, 10/100/1000 port. Mirroring multiple ports is possible but can create congestion at the mirror capture port.

Q-in-Q VLAN for performance & security

The Q-in-Q (Double-Tag) VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the same VLAN broadcast domain also enhances performance and use of double VLAN tags that an efficient method for enabling Subscriber Aggregation. It provides two methods: a. SP-tag: 88a8. b. SP-tag: 8100 for Switch configuration.

Isolated Group, provides protection for certain ports

The isolated group feature allows certain ports to be designated as protected. All other ports are non-isolated. Traffic between isolated group members is blocked. Traffic can only be sent from isolated group to non-isolated group.

Mac-based 802.3ad LACP with automatic link fail-over

Dynamic fail-over means packets will not get assigned to any trunk member port that has failed. If one of the ports were to fail, traffic will automatically get distributed to the remaining active ports.

802.1X Access Control improves network security

802.1X features enable user authentication for each network access attempt. Port security features allow you to limit the number of MAC addresses per port in order to control the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the number of access stations.

802.1D Compatible & 802.1w Rapid Spanning Tree & 802.1s Multiple Spanning Tree

For mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in event of any fail-over switch on the network.

MSTP is according to IEEE 802.1Q 2005 Clause 13 ??Multiple Spanning Tree Protocol. MSTP allows frames assigned to different VLANs to follow separate paths, each based on an independent Multiple Spanning Tree Instance (MSTI), within Multiple Spanning Tree (MST) Regions composed of LANs and or MST Bridges.

2 dual media ports for flexible fiber connection

Port 9, 10 dual media ports are provided for flexible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or long distance fiber backbone attachment. Use of the SFP will disable their corresponding built-in 10/100/1000Base-T connections.

Broadcast/Multicast/unknown-unicast Storm Control

To limit too many broadcast/multicast/unknown-unicast flooding in the network, broadcast/multicast storm control is used to restrict excess traffic. Threshold values are available to control the rate limit for each port. Packets are discarded if the count exceeds the configured upper threshold.

Access Control List (ACL)

The ACLs are divided into EtherTypes. IPv4, ARP protocol, MAC and VLAN parameters etc. Here we will just go over the standard and extended access lists for TCP/IP. As you create ACEs for ingress classification, you can assign a policy for each port, the policy number is 1-8, however, each policy can be applied to any port. This makes it very easy to determine what type of ACL policy you will be working with.

PoE Saves Your Power Infrastructure and Installation Cost

8-PoE ports allow power (65W, up to 4-port support 15.4W, or up to 8-port support 7.7W) for FZ-PSES-2410C and (130W, up to 8-port support 15.4W) for FZ-PSES-2410CF to be supplied to end devices, such as Wireless Access Points or VoIP Phones, directly through the existing LAN cables, eliminating costs for additional AC wiring and reducing Installation Cost. It frees your wireless AP deployment from restriction due to power outlet location. By supplying the power end-span, you can centralize power distribution and backup without the need to increase infrastructure.

LLDP (IEEE 802.1AB Link Layer Discovery Protocol)

The switch supports the LLDP that automated device discovery protocol for easy mapping by network management applications.

SSL and SSH for secure Management

Secure Sockets Layer (SSL) supports the encryption for all HTTP traffic, allowing secure access to the browser-based management GUI in the switch. And Secure Shell (SSH) which supports the encryption for all transmitted data for secure, remote command-line interface (CLI) access over IP networks

TACACS+ for Management Authentication

The switch supports the TACACS+ authentication for secure switch CLI Logon. It provides more secure authentication for management.

Power Saving

The Power saving provides detection the client idle and provides the different power. It could efficient to save the switch power and reduce the power consumption.

 

 
Technical Specifications

nStandard compliance          

  —IEEE 802.3 10Base-T Ethernet(Twisted-pair copper)

  —IEEE 802.3u 100Base-TX Ethernet(Twisted-pair copper)

  —IEEE 802.3ab 1000Base-T Ethernet(Twisted-pair copper)

  —IEEE 802.3z 1000Base-SX/LX Ethernet

  —IEEE 802.3x Flow Control Capability

  —IEEE 802.1Q VLAN

  —IEEE 802.1p Class of Service

  —IEEE 802.1X Access Control

  —IEEE 802.1D Spanning Tree

  —IEEE 802.1w Rapid Spanning Tree

  —IEEE 802.1s Multiple Spanning Tree

  —IEEE 802.3ad Link Aggregation Control Protocol (LACP)

  —IEEE 802.1AB LLDP (Link Layer Discovery Protocol)

  —IEEE 802.3af PoE

nRoHS Compliance

nPower Saving for green ethernet Requirement

nLLDP automated device discovery protocol for easy mapping by
  network management applications

nPerformance

  Switching capacity:

  —8 K MAC addresses

  —Supports Throughput: 5.6Gbps

  —Unknown Unicast/Broadcast/Multicast Storm Suppression

  —Port Mirroring

  Subscriber Interface

  —8-port Fast Ethernet ports with non-blocking wise speed 
     
performance

  —Port 9, 10 are Gigabit TP/SFP Fiber auto sense

  —Auto-Negotiation and Auto-MDIX

  —Backpressure flow control for half duplex

  —802.3x flow control for full duplex

  —Connector: 8 RJ-45 and 2 dual media, RJ-45/SFP

      VLAN

  —Port-base VLAN

  —IEEE802.1Q tag-base VLAN, up to 4k active VLANs

  —Q-in-Q is an efficient method for enabling Subscriber Aggregation.

  —Multicast VLAN Registration (MVR) management.

  QoS

  —Port Based, 802.1p and Diffserv (IPv4 ) QoS packet classification

  —Supports two scheduling, WRR and Strict

  Bandwidth Control

  —Supports bandwidth rating per port ingress and egress rate limit 
     
FE-Ports: 64~102400Kbps/ GE-Ports:1024~1024000Kbps

  Broadcast Storm

  —Multicast/Broadcast/Unknown-Unicast Storm suppression

  Port Mirroring

  —Support 1: N mirroring

  —Supports port sniffer function with Ingress and Egress

      VSM (Virtual Stacking Management)

  —Up to 16 switches can be managed via Single IP limited to any 
     
specific Fiberzone models.

  —Virtual stacking, no extra stacking hardware is required

  —Distributed stacking, no physical central wiring closet is needed

nProtocol

  LACP

  —Port trunking with 4 trunking group

  —Up to 4 ports for each group.

      GVRP

  —802.1Q with GVRP

      Multicasting

  —Supports IGMPv3 snooping including active and passive mode

  STP/RSTP/MSTP

  —802.1D/1w/1s

nPoE Specification

  —8 IEEE802.3af PoE PSE ports

  —Endpoint with 48VDC power through RJ-45 pin 1, 2, 3, 6.

  —PoE-PSE activity LED indicator.

  —Auto detect powered device and consumption levels

  —Supports per port power consumption monitoring

  —Smart feature for PD on/off, PD detection, power level, PD status 
     
and power feeding priority

  —Circuit protection to prevent power interference between ports

  —Supports per port PoE State setting

  —Supports per port power priority setting

  —65 or 130 watts of total power diversified options

nNetwork Security

  —802.1X access control for port based and MAC based 
     
authentication

  —Management Access Policy Control

  —Access control List

  —IP-MAC-Port binding

  —DHCP Snooping (Including DHCP Option 82)

  —SSL/ SSH for Management

  —TACACS+ for Management Authentication

nSNMPv1,v2c,v3 Network Management

 

nRFC 1213 MIB (MIB-II)

nRFC 1757 RMON MIB

   nInterface MIB

   nStatistics Group 1

   nAddress Translation MIB

   nHistory Group 2

   nIP MIB

   nAlarm Group 3

   nICMP MIB

   nEvent Group 9

   nTCP MIB

nRFC 1493 Bridge MIB

   nUDP MIB

nRFC 1643 Ethernet MIB

   nSNMP MIB

nEnterprise MIB

 

nLED Description

 

LED

Color

Function

System LED

PWR

Green

Lit when  power is coming up

10/100Ethernet TP Port 1 to 8 LED

 LINK/ACT/SPD

Green/

Amber

—Lit Green when 100Mbps speed is 
   
active

—Lit Amber when 10Mbps speed is 
   
active

—Blinks when any traffic is present

PoE

Green

Lit when PoE Power is active

GIGA SFP Port 9 to 10 LED

 SFP(LINK/ACT)

Green

—Lit green when 1000Mbps speed
    
is active

—Blinks when any traffic is present

10/100/1000 TP Port 9 to 10 LED

LNK/ACT/SPD

Green/ Amber

—Lit Green when 1000Mbps speed
    
is active

—Lit Amber when 10/100Mbps speed 
   
is active

—Blinks when any traffic is present

nNetwork Interface

 

Configuration

Connector

Port

10/100Mbps TP Jack (RJ-45)

TP(RJ-45)

1 to 8

1000Mbps SFP Fiber Module

Dual Media Auto Detection

TP(RJ-45) / SFP

9,10

nHardware Spec.

 

             Feature

Detailed Description

Power Characteristics                                  

Voltage 100~240 V

Frequency 50~60 Hz

PoE Power :

Max. 15W ( in case no PD device  connected)

Max. 65W ( with 4 x 15.4W PD device connected ) –PSES-2410C

Max. 130W ( with 8 x 15.4W PD device connected ) –PSES-2410CF

Ambient Temperature

0 to 40°C

Humidity   

5% to 90%

Dimensions

44( H) x 280(W) x 164.8(D) mm

Weight

1.9kg

EMI

Comply with FCC Part 15 Class A & CE Mark Approval

 

 Packing Information

 

Carton Dimensions (mm)

pcs/Carton

N.W (KG)

G.W (KG)

493x430x352

5

10.85

11.85

 

 

 

Ordering Information

 

 

FZ-PSES-2410C

8-Port L2 Plus Managed Fast Ethernet PoE Switch + 2 TP/SFP Gigabit Dual Media

FZ-PSES-2410CF

8-Port L2 Plus Managed Fast Ethernet PoE Switch + 2 TP/SFP Gigabit Dual Media (Full power)

 

Optional SFP Module

 

SFP.LC

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 850nm

SFP.LC.M2

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 1310nm 2km

SFP.LC.S10

1000Base-LX GE SFP Fiber Module, LC Single-Mode 10km

SFP.LC.S30

1000Base-LX GE SFP Fiber Module, LC Single-Mode 30km

SFP.LC.S50

1000Base-LX GE SFP Fiber Module, LC Single-Mode 50km

SFP.BL3.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1310nm

SFP.BL5.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1550nm

SFP.BL3.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1310nm

SFP.BL5.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1550nm

 

 

Note :

We recommend the SFP transceiver from the following vendors:

1. Fiberzone Pte Ltd

2. Agilient Technologies

3. AVAGO Technologies

4. Finisar Corporation

FZ-PSES-2226C & FZ-PSES-2226CF – 24-Port L2 Plus Managed Fast Ethernet PoE Switch + 2 TP/SFP Gigabit Dual Media

Description
FZ-PSES-2226C/CF supports 24 10/100Mbps Auto-negotiation, Auto-MDIX Ethernet ports and Power over Ethernet to IEEE 802.3af compliant devices. With the 24-port featuring PoE function, it is an ideal solution for wireless AP, VoIP phones, security video cameras. It’s fully compliant with the standards of IEEE 802.3/u/x/z/ab/af. It is equipped with 24 UTP (RJ-45) ports and 2 of which are dual media ports that accommodate optional 10/100/1000Base-T or SFP modules.It can be managed through RS-232 serial port, or through Ethernet port using CLI or Web-based management unit, associated with SNMP agent. With the SNMP agent, the network administrator can logon the switch to monitor, configure and control each port’s activity in a friendly way.
In addition, the switch implements the QoS (Quality of Service), Mac Filtering Policy, Port Mirror, VLAN and full L2 protocol. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications with security. The switch also supports includes ACL, IP-MAC-Port Binding and DHCP Snooping capability for security purpose. It is suitable for both metro-LAN and office applications.
These series product supports two kinds of model as FZ-PSES-2226C (185W) supports up to 12-port 15.4W and 24-port 7.7W and FZ-PSES-2226CF (380W) supports up to 24-port 15.4W for each PoE solution.
Others the switch increase supports the Power saving for reduce the power consumption. It could efficient saving the switch power with auto detect the client idle and cable length to provide different power. It also could to support the SSH/SSL/TACACS+/RADIUS (Optional for project requirement) for security network management.
Note: The serial product has two kinds model with FZ-PSES-2226C (185W) and FZ-PSES-2226CF (380W)

 

Key Benefits

n 2 Dual Media for flexible fiber connection
n IEEE 802.1X Access Control improve network security
n Port Mirroring helps supervisor monitoring network
n Support Q-in-Q(Double-tag)
n IEEE802.1Q tag-base VLAN, 4094 entries max and port-base VLAN
n IEEE 802.1D Compatible, 802.1w Rapid Spanning Tree and 802.1s Multiple Spanning Tree
n Unknown Unicast/Broadcast/Multicast Storm Control
n IP-MAC-Port binding for LAN security
n QCL based on application traffic for QoS and rate limitation management
n ACL based on Ethernet Type / ARP / IPv4 for packets permit or deny, rate limitation and port copy
n DHCP Snooping (Including Option 82)
n IEEE802.3af Power Over Ethernet compliant
n Support “power saving” for green ethernet requirement
n Support LLDP (Link Layer Discovery Protocol, IEEE802.1AB) provides a standards-based method for enabling switches to advertise themselves
n SSH/SSL/TACACS+/RADIUS (Optional for project requirement) for security network management
n 185 or 380 watts of total power diversification options

 

 
Technical Specifications

n       Standard Compliance        

n        IEEE 802.3 10Base-T Ethernet(twisted-pair copper)

n        IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)

n        IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper)

n        IEEE 802.3z 1000Base-SX/LX Ethernet

n        IEEE 802.3x flow control capability

n        ANSI/IEEE 802.3 auto-negotiation

n        IEEE 802.1Q VLAN

n        IEEE 802.1p Class of Service

n        IEEE 802.1X Access Control

n        IEEE 802.1D Spanning Tree

n        IEEE 802.1w Rapid Spanning Tree

n        IEEE 802.1s Multiple Spanning Tree

n        IEEE 802.3ad Link Aggregation Control Protocol (LACP)

n        IEEE 802.1AB LLDP (Link Layer Discovery Protocol)

n        IEEE 802.3af PoE

n       RoHS Compliance

n       Power Saving for green ethernet Requirement

n       LLDP automated device discovery protocol for easy mapping by network management applications

n       Performance

n        Switching capacity:

n          Non-blocking switch fabric supports up to 24FE+2GbE, ports

n          8 K MAC addresses

n          256k packet buffer and 128k control memory

n          The maximum throughput is 8.8Gbps

n          With 64 bytes packets throughput is 6.547Mpps

n        Subscriber Interface

n          Port 1-24 are 10/100Mbps Fast Ethernet ports

n          Port 25,26 are Gigabit TP/SFP Fiber auto sense

n          Auto-Negotiation and Auto-MDIX

n          Backpressure flow control for half duplex.

n          802.3x flow control for full duplex.

n          Connector: 24 RJ-45 and 2 dual media, RJ-45/SFP

n        VSM(Virtual Stacking Management)

n          Up to 16 switches can be managed via Single IP limited to any specific Fiberzone models.

n          Virtual stacking, no extra stacking hardware is required

n          Distributed stacking, no physical central wiring closet is needed

n        VLAN

n          Supports SVL/IVL configuration to meet your VLAN requirement

n          Port-base VLAN

n          IEEE802.1Q tag-base VLAN, up to 4k active VLAN

n          Q-in-Q is an efficient method for enabling Subscriber Aggregation

n          Q-in-Q is an efficient method for enabling Subscriber Aggregation

n          Multicast VLAN Registration (MVR) management

n        QoS

n          Port Based, 802.1p and Diffserv (IPv4 ) QoS packet classification

n          Supports two scheduling, WRR and Strict

n        Rate Limit

n          Ingress rate limit:

n           Port 1~24: 64K up to 100Mbps

n           Port 25, 26: 64K up to 1000Mbps

n          Egress rate limit:

n           Port 1~24: 64K up to 100Mbps

n           Port 25, 26: 64K up to 1000Mbps

n       PoE Specification

n        24 IEEE 802.3af PoE PSE ports

n        Endpoint with 48VDC power through RJ-45 pin 1, 2, 3, 6.

n        PoE-PSE activity LED indicator.

n        Auto detect powered device and consumption levels

n        Supports per port power consumption monitoring

n        Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority

n        Circuit protection to prevent power interference between ports

n        Supports per port PoE State setting

n        Supports per port power priority setting

n        185 or 380 watts of total power diversified options

n       Protocol

n        LACP

n          12 Fast Ethernet +1 Gigabit Ethernet groups

n          Per-group max 8 members

n          Provides DA, SA and DA+SA Mac-based trunking with automatic link fail-over

n        GVRP/GARP

n          802.1Q with GVRP/ GARP

n        Multicasting

n          Supports IGMPv3 snooping including active and passive mode

n        STP/RSTP/MSTP

n          802.1D/1w/1s

n        Broadcast Storm

n          Multicast/Broadcast/Unknown-Unicast Storm suppression.

n        Port Mirroring

n          Support 1: N RX port mirroring.

n          Supports port sniffer function with 3 modes:

(TX Monitor Mode, RX Monitor Mode and TX-RX pair Monitor Mode).

n       Network Security

n        802.1X access control

n        Management Access Policy Control

n        Access control List

n        IP-MAC-Port binding

n        DHCP Snooping (Including DHCP Option 82)

n        SSL/ SSH for Management (Optional by Project Requirement)

n        TACACS+ for Management Authentication (Optional by Project Requirement)

n       VSM (Virtual Stacking Management)

n        Supports 16 devices stacking

n        Multiple switches can be managed via one IP address, just like software stacking

n        Low cost and easy to establish network environment, no extra hardware required

n        Not center on the physical location of wiring closets

n       Snmpv1,v2c Network Management

 

¦ RFC 1213 MIB (MIB-II)

¦ RFC 1757 RMON MIB

   ¦ Interface MIB

   ¦ Statistics Group 1

   ¦ Address Translation MIB

   ¦ History Group 2

   ¦ IP MIB

   ¦ Alarm Group 3

   ¦ ICMP MIB

   ¦ Event Group 9

   ¦ TCP MIB

¦ RFC 1493 Bridge MIB

   ¦ UDP MIB

¦ RFC 1643 Ethernet MIB

   ¦ SNMP MIB

¦ Enterprise MIB

 

 

n       LED Description

 

LED

Color

Function

System LED

CPURUN

Green

Blinks when CPU is on and good

POWER

Green

Lit when AC power is on and good

ACT

Green

Lit when LEDSET set on active mode

FDX

Green

Lit when LEDSET set on full-duplex mode

SPD

Green

Lit when LEDSET set on speed mode

10/100Mbps Ethernet TP Port 1 to 24 LED

LNK

Green

Lit when connection with remote device is good

Off when cable connection is not good

ACT/FDX/ SPD

Amber

(TP Port 1 to 24 LED)

a. LEDSET set on ACT (active) mode:

Blinks when any traffic is present

b. LEDSET set on FDX (full-duplex) mode:

Lit when full-duplex mode is active

Blinks when any collision is present

c. LEDSET set on SPD (speed) mode:

Lit when 100Mbps speed is active

Off when 10Mbps speed is active

10/100/1000Mbps Gigabit TP/Fiber Port 25, 26 LED

    LNK

Green

Lit when connection with remote device is good

Off when cable connection is not good

    FX

Green

Lit when Fiber port is active

Off when TP port is active

ACT/FDX/ SPD

Green

(Port 25, 26 LED)

a. LEDSET set on ACT (active) mode:

Blinks when any traffic is present

b. LEDSET set on FDX (full-duplex) mode:

Lit when full-duplex mode is active

Blinks when any collision is present

c. LEDSET set on SPD (speed) mode:

Lit when 1000Mbps speed is active

Off when 10/100Mbps speed is active

PoE Port Status Indication LEDs

PoE-PSE ACT

Green

Lit when PoE Power is active

 

n       Cable and Maximum Length:

 

Feature

 

TP

Cat. 5 UTP cable, up to 100m

1000Base-SX LC M-M

Up to 220/275/500/550m, 
which depends on Multi-Mode Fiber type

1000Base-LX LC S-M

Single-Mode Fiber, up to10/30/50Km

1000Base-LX WDM LC S-M

Single-Mode Single Fiber, Bidi 20Km

 

n       Hardware Spec.

 

Feature

Detailed Description

                              

                         Power Characteristics      

Voltage :100~240 VAC

Frequency :50~60 Hz

PoE Power :

Max. 15W ( in case no PD device  connected)

Max. 185W ( with 12 x 15.4W PD device connected ) –PSES-2226C

Max. 380W ( with 24 x 15.4W PD device connected ) –PSGS-2226CF

Ambient Temperature

0° to 40°C

Humidity   

5% to 90%

Dimensions

FZ-PSES-2226C  : 44(H) x 442(W) x 209(D) mm

FZ-PSES-2226CF : 44(H) x 442(W) x 366(D) mm

Weight

FZ-PSES-2226C  : 3.3kg

FZ-PSES-2226CF : 5.47kg

EMI

Comply with FCC Part 15 Class A & CE Mark Approval

 

Packing Information

 

Model

Carton Dimensions (mm)

pcs/Carton

N.W (KG)

G.W (KG)

FZ-PSES-2126C

530x512x345

5

21

22

FZ-PSES-2126CF

551x488x312

2

14.2

15.2

 

Ordering Information

 

FZ-PSES-2226C

24-Port L2 Plus Managed Fast Ethernet PoE Switch + 2 TP/SFP Gigabit Dual Media

FZ-PSES-2226CF

24-Port L2 Plus Managed Fast Ethernet PoE Switch + 2 TP/SFP Gigabit Dual Media (Full power)

 

Optional SFP Module

 

SFP.LC

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 850nm

SFP.LC.M2

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 1310nm 2km

SFP.LC.S10

1000Base-LX GE SFP Fiber Module, LC Single-Mode 10km

SFP.LC.S30

1000Base-LX GE SFP Fiber Module, LC Single-Mode 30km

SFP.LC.S50

1000Base-LX GE SFP Fiber Module, LC Single-Mode 50km

SFP.BL3.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1310nm

SFP.BL5.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1550nm

SFP.BL3.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1310nm

SFP.BL5.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1550nm

 

Note :

We recommend the SFP transceiver from the following vendors:

1. Fiberzone Pte Ltd

2. Agilient Technologies

3. AVAGO Technologies

4. Finisar Corporation

FZ-PSGS-2208GH – 8-Port GbE L2 Plus Managed PoE+ Switch with 2 (100/1000M)SFP Dual Media (130W)

Description
FZ-PSGS-2208GH series PoE Switch, a 8-port Gigabit Plus Managed PoE Switch, is a standard switch that meets all IEEE 802.3/u/x/z/ab/af/at standards. It includes 6-Port 10/100/1000Mbps TP with PoE which compliant with IEEE802.3at function and 2-Port Gigabit TP/ (100/1000M)SFP Fiber. It is an ideal solution for wireless AP, VoIP phones and security video cameras.
It can be managed through RS-232 serial port, or through Ethernet port using CLI or Web-based management unit, associated with SNMP agent. With the SNMP agent, the network administrator can manage switch, configure and control in a friendly way. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications.
In addition, the switch features comprehensive and useful functions such as DHCP Snooping (Including Option 82), QoS (Quality of Service), Spanning Tree, RSTP/MSTP, VLAN, Port Trunking, Bandwidth Control, Port Security, MVR, SNMP/RMON, LLDP and IGMPv3 Snooping capability via the intelligent software. It is suitable for both metro-LAN and office applications.
Others the switch increase supports the Power saving for reduce the power consumption. It could efficient saving the switch power with auto detect the client idle and cable length to provide different power. It also could to support the SSH/ SSL/ TACACS+/ RADIUS for security network management
The switch provides advance PoE managed function includes: a. PoE configuration increase PoE Detection Mode: (1. 2-Point (Default)?2. 4-Point?3. Legacy and 4. No Detection); b. PoE Power Delay: (Per Port Setting Delay Time for when system reboots or restarts); c. PoE Auto Check: (Per Port to Auto Ping Remote PD IP Address, If the Remote PD Ping IP Failure user can define do action to turn off and turn on the Ping failed port PoE power to reboot remote PD); d. PoE Scheduling: (Use NTP to get time for PoE Scheduling).
Note: FZ-PSGS-2208GH supports PoE Power Max. 130W

 

Key Benefits

2 dual media for flexible fiber connection
- Support Jumbo Frame size up to 9KB
- IEEE 802.1X Access Control improve network security
- Port Mirroring helps supervisor network maintenance
- Support Q-in-Q(Double-tag)
- IEEE802.1Q tag-base VLAN, 4094 entries and port-base VLAN.
- IEEE 802.1D Compatible, 802.1w Rapid Spanning Tree and 802.1s Multiple Spanning Tree
- Support IEEE 802.3af/at compliant with Endpoint with 52 to 56VDC power through RJ-45 pin 1, 2, 3, 6. for PoE Requirement. (FZ-PSGS-2208GH provides up to 30W/port for 4-port or up to 15.4W/port for 8-port)
- Unknown Unicast/Broadcast/Multicast Storm Control
- Multicast Vlan Registration for IPTV
- IP-MAC-Port binding for security
- Support QoS (QCL/QCE) for traffic control
- Support ACLs Based on Ethernet Type / ARP / IPv4 for packets permit or deny, rate limitation and port copy
- DHCP Snooping (Including DHCP Option 82)
- Support IGMPv3 snooping and IGMP proxy
- SSH/SSL/TACACS+/RADIUS for security network management
- Provide Advance PoE Management function includes: PoE detection mode with. (a.2-Point (Default)?b. 4-Point?c. Legacy and d. No Detection)? PoE Auto check?PoE Power Delay and PoE Scheduling.
- Support “power saving” for Green Ethernet requirement.
- Support LLDP (Link Layer Discovery Protocol, IEEE802.1AB) provides a standards-based method for enabling switches to advertise themselves.

 

 
Technical Specifications

  •  Standard compliance 
    • IEEE 802.3 10Base-T Ethernet (Twisted-pair Copper)
    • IEEE 802.3u 100Base-TX Ethernet (Twisted-pair Copper)
    • IEEE 802.3ab 1000Base-TX Ethernet (Twisted-pair Copper)
    • IEEE 802.3z 1000Base-X Ethernet
    • IEEE 802.3x Flow Control Capability
    • ANSI/IEEE 802.3 Auto-negotiation
    • IEEE 802.1Q VLAN
    • IEEE 802.1p Class of Service
    • IEEE 802.1X Access Control
    • IEEE 802.1D Spanning Tree
    • IEEE 802.1w Rapid Spanning Tree
    • IEEE 802.1s Multiple Spanning Tree
    • IEEE 802.1AB LLDP (Link Layer Discovery Protocol)
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • IEEE 802.3at PoE+ standard
  • RoHS Compliance
  • Power Saving for green ethernet Requirement.
  • LLDP automated device discovery protocol for easy mapping by network management applications
  • Performance
  • Switching capacity:
    •  8 Gigabit Ethernet ports with non-blocking wise speed performance.
    •  16Gbps switch capacity
    •  8K MAC addresses
    •  Supports Jumbo frame, up to 9K
    •  Unknown Unicast/Broadcast/Multicast Storm Suppression
    •  Port Mirroring
  • VLAN:
    •  Port-base VLAN
    •  IEEE802.1Q tag-base VLAN, up to 4k VLANs
    •  Support the Q-in-Q (Double-tag)
    •  Support MVR (Multicast VLAN Registration)
  • VSM (Virtual Stacking Management):
    •  Up to 16 switches can be managed via Single IP limited to any specific Fiberzone models.
    •  Virtual stacking, no extra stacking hardware is required
    •  Distributed stacking, no physical central wiring closet is needed
  • QoS:
    •  Supports Port Based, 802.1p and Diffserv (IPv4 ) QoS packet classification
    •  Supports two scheduling, WRR and Strict
    •  Supports 802.1p QoS with four level priority queue
  • Bandwidth Control
    •  Supports bandwidth rating ingress and egress rate limit 500Kbps~1000Mbps with 1Kbps
  • Protocol
  • LACP:
    •  Port trunking with 4 trunking group
    •  Up to 4 ports for each group.
  • GVRP/GARP:
    •  802.1Q with GVRP/ GARP
  • Multicasting:
    •  Supports IGMPv3 snooping including active and passive mode
    •  Supports IGMP proxy including active and passive mode
  • STP/RSTP/MSTP:
    •  802.1D/1w/1s
  • PoE Specification
    • 8 IEEE802.3af/at PoE PSE ports
    • Endpoint with 52 to 56 VDC power through RJ-45 pin 1, 2, 3, 6.
    • PoE-PSE activity LED indicator.
    • FZ-PSGS-2208GH supports 130 watts of total power (FZ-PSGS-2208GH supports up to 30 watts for 4 ports , or up to 15.4 watts for 8 ports)
    • Auto detect powered device and consumption levels
    • Supports per port power consumption monitoring
    • Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority
    • Circuit protection to prevent power interference between ports
    • Supports per port PoE state setting
    • Supports per port power priority setting
    • Supports PoE Detection mode: a. 2-Point (Default)?b. 4-Point?c. Legacy and d. No Detection
    • Supports PoE Power Delay for device reboot or restart.
    • Supports PoE Auto Check for remote reboot PD when it failure.
    • Supports PoE Scheduling for reduce Power consume.
  • Network Security
    • 802.1X access control for port based and MAC based authentication
    • Management Access Policy Control
    • Access Control List
    • IP-MAC-Port binding
    • DHCP Snooping (Including DHCP Option 82)
    • SSL/ SSH for Management
    • TACACS+ for Management Authentication

Snmpv1,v2c,v3 Network Management

RFC 1213 MIB (MIB-II)

RFC 1757 RMON MIB

   Interface MIB

   Statistics Group 1

   Address Translation MIB

   History Group 2

   IP MIB

   Alarm Group 3

   ICMP MIB

   Event Group 9

   TCP MIB

RFC 1493 Bridge MIB

   UDP MIB

RFC 1643 Ethernet MIB

   SNMP MIB

Enterprise MIB

 

 

LED Description:

 

 

LED

Color

                Function

System LED

 PWR

Green

Lit when +5V power is coming up

 CPU

Green

Blinks when

10/100/1000 Ethernet TP Port 1 to 8 LED

 LINK/ACT/SPD

Green/

Amber

Lit Green when TP link on 1000Mbps speed

Lit Amber when TP link on 10/100Mbps speed

Blinks when any traffic is present

PoE

Green

Lit when PoE Power is active

100/1000M Fiber Port 7, 8 LED

 (LINK/ACT/SPD)

Green/ Amber

Lit Green when 1000Mbps speed is active

Lit Amber when 10/100Mbps speed is active

Blinks when any traffic is present

Network Interface:

Configuration

Connector

Port

10/100/1000 Mbps TP Jack (RJ-45)

TP(RJ-45)

1 to 8

100/1000M SFP Fiber Module

Dual Media Auto Detection

(100/1000M)SFP

7,8

 

Hardware Spec:

             Feature

Detailed Description

Power Characteristics

Voltage : 100~240 VAC

Frequency : 50~60 Hz

Power Supply : 130W FZ-PSGS-2208GH

Ambient Temperature

0° to 40°C

Humidity   

5% to 90%

Dimensions

44 (H) ´ 280 (W) ´ 166 (D) mm

Weight

1.9 Kg

EMI

Comply with FCC Part 15 Class A & CE Mark Approval

Packing Information

 

Carton Dimensions(mm)

pcs/Carton

N.W (KG)

G.W (KG)

 

493x430x352

5

11.75

12.75

 

Ordering Information

¦Model

 

FZ-PSGS-2208GH

8-Port GbE L2 Plus Managed PoE+ Switch with 2 (100/1000M) SFP Dual Media (130W)

¦Optional SFP Module

 

SFP.LC

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 850nm

SFP.LC.M2

1000Base-SX GE SFP Fiber Module, LC Multi-Mode 1310nm 2km

SFP.LC.S10

1000Base-LX GE SFP Fiber Module, LC Single-Mode 10km

SFP.LC.S30

1000Base-LX GE SFP Fiber Module, LC Single-Mode 30km

SFP.LC.S50

1000Base-LX GE SFP Fiber Module, LC Single-Mode 50km

SFP.BL3.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1310nm

SFP.BL5.S10

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 10km, 1550nm

SFP.BL3.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1310nm

SFP.BL5.S20

1000Base-LX GE SFP Fiber Module, Bidi LC Single-Mode 20km, 1550nm

SFP.FLC

100Base-FX FE SFP Fiber Module, LC Multi-Mode

SFP.FLC.S20

100Base-FX FE SFP Fiber Module, LC Single-Mode 20km

 

Note:

We recommend the SFP transceiver from the following vendors:

1. Fiberzone Pte Ltd

2. Agilient Technologies

3. AVAGO Technologies

4. Finisar Corporation